Keysight (Agilent) F9650A
| Attribute | Value |
|---|---|
| Frequency Range | 700 MHz to 2.7 GHz |
| Form Factor | Handheld / Portable |
| Application | Cable and Antenna Analyzer |
| Measurement Parameters | Return Loss, VSWR, Cable Loss, Distance-to-Fault (DTF) |
| Dynamic Range | Up to 45 dB |
| Display | Sunlight-readable color LCD touchscreen |
| Connector Type | N-Type (female) |
| Power Supply | Rechargeable Lithium-Ion battery / AC adapter |
| Battery Life | Approximately 3 hours of continuous operation |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
Keysight (Agilent) F9650A Options:
- F9630A - PG1 - Positioner system: roll-over-azimuth, standard torque, 30-cm QZ
- F9630A - AG1 - FR1 link antenna/mounts/cables
- F9630A - AH1 - FR2 link antenna/mount/cables
- F9630A - AJ1 - Dual polarization probe/fixture/cables, 24 to 42 GHz, 30-cm QZ
- F9630A - AK1 - Out-of-band spurious probes/fixture/cables, 6 to 110 GHz, 30-cm QZ
- F9630A - BG1 - Cal kit, in band measurements (24 to 42 GHz)
- F9630A - BH1 - Cal kit, spurious measurements (6 to 110 GHz), with U9361M-5CX
- U9361M - 5CX - RCal receiver calibrator, 1.0 mm, 10 MHz to 110 GHz
- F9630A - CA2 - RF cable M-M 1.85 mm, 24 in (61 cm)
- F9630A - CA4 - RF cable M-M 1.85 mm, 48 in (122 cm)
- F9630A - M01 - Routing IF/RF amplifier unit, 24 to 40 GHz for non-signaling
- F9630A - M02 - Integrated PA-LNA switch module kit, 24-42 GHz for signaling
- F9631A - (base) - Temperature control unit -10 to +55 °C
- F9631A - TA1 - DUT temperature enclosure kit A
- F9630A - MB1 - Chamber security bracket kit
- F9629001A - (base) - OTA Chamber control software
- F9629020A - (base) - OTA 3D Viewer software
- F9629030A - (base) - OTA VNA control software (requires KS8400A TAP)
- F9629031A - (base) - OTA signal analyzer control (requires KS8400A TAP)
- F9629040A - (base) - OTA temperature control software
| Model | F9650A |
|---|
The Keysight (Agilent) F9650A Compact Antenna Test Range (CATR) delivers precise over-the-air millimeter-wave measurements for 5G NR testing. It supports configurations from 24–42 GHz in-band and up to 110 GHz for spurious emissions, integrating seamlessly with Keysight’s signal and network analyzers. Users can select link antennas, calibration kits, device positioners, and Quiet Zone sizes for tailored R&D and compliance testing.
This system supports RF design validation, RRM AoA, demodulation, and carrier acceptance, with software enabling advanced 2D/3D plotting, data management, and automated measurement grid control through Keysight TAP plugins.
Testwall can supply the used Keysight (Agilent) F9650A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) F9650A.
