Keysight (Agilent) N9040B-513 UXA Signal Analyzer, Multi-touch, 3 Hz to 13.6 GHz
| Attribute | Value |
|---|---|
| Frequency Range | 3 Hz to 13.6 GHz |
| Display Type | Multi-touch capacitive touchscreen |
| Displayed Average Noise Level (DANL) | -163 dBm/Hz (typical, preamp on) |
| Phase Noise | -130 dBc/Hz at 1 GHz carrier, 10 kHz offset (typical) |
| Analysis Bandwidth | Up to 510 MHz (with optional hardware) |
| Amplitude Accuracy | ±0.19 dB total uncertainty (typical) |
| Dynamic Range | Up to 78 dB third-order intermodulation (TOI) dynamic range |
| Input Impedance | 50 Ohm |
| Resolution Bandwidth (RBW) | 1 Hz to 50 MHz |
| Operating Temperature Range | 0°C to 55°C |
Keysight (Agilent) N9040B-513 UXA Signal Analyzer, Multi-touch, 3 Hz to 13.6 GHz Options:
- N9040B-513 - 508 - Frequency option: 2 Hz to 8.4 GHz (DC coupled)
- N9040B-513 - 513 - Frequency option: 2 Hz to 13.6 GHz (DC coupled)
- N9040B-513 - 526 - Frequency option: 2 Hz to 26.5 GHz (DC coupled)
- N9040B-513 - 544 - Frequency option: 2 Hz to 44 GHz (DC coupled)
- N9040B-513 - 550 - Frequency option: 2 Hz to 50 GHz (DC coupled)
- N9040B-513 - P08 - Preamplifier, 9 kHz to 8.4 GHz
- N9040B-513 - P13 - Preamplifier, 9 kHz to 13.6 GHz
- N9040B-513 - P26 - Preamplifier, 9 kHz to 26.5 GHz
- N9040B-513 - P44 - Preamplifier, 9 kHz to 44 GHz
- N9040B-513 - P50 - Preamplifier, 9 kHz to 50 GHz
- N9040B-513 - EA3 - Electronic attenuator, 2 Hz to 3.6 GHz, 0 to 24 dB in 1 dB steps
- N9040B-513 - B25 - 25 MHz analysis bandwidth (standard)
- N9040B-513 - B40 - 40 MHz analysis bandwidth
- N9040B-513 - B2X - 255 MHz analysis bandwidth
- N9040B-513 - B5X - 510 MHz analysis bandwidth
- N9040B-513 - H1G - 1 GHz analysis bandwidth
- N9040B-513 - NF2 - Noise Floor Extension
- N9040B-513 - EMC - EMC bandwidth (CISPR and MIL STD 461E compliant bandwidths)
- N9040B-513 - RBE - Extended resolution bandwidth (additional RBW settings up to 212 MHz)
- N9040B-513 - MPB - Microwave preselector bypass
- N9040B-513 - RT1 - Real-time spectrum analyzer, basic detection
- N9040B-513 - RT2 - Real-time spectrum analyzer, optimal detection
- N9040B-513 - DUA - Dual real-time analysis (up to 2 x 255 MHz at same center frequency, requires B5X)
- N9040B-513 - RTS - Real-time I/Q data streaming, 255 MHz, LVDS interface
- N9040B-513 - C35 - APC 3.5 mm male RF input connector (with Option 526 only)
- N9040B-513 - ALV - Log video output
- N9040B-513 - CRP - Programmable IF output, 10 to 75 MHz center frequency
- N9040B-513 - YAV - Y-axis video output
- N9040B-513 - DP4 - Extended memory (4 GB / 8 GB total memory for B5X/H1G data acquisition)
| Model | N9040B-513 |
|---|
The Keysight (Agilent) N9040B UXA Signal Analyzer offers advanced signal analysis with frequency coverage from 3 Hz to 13.6 GHz, extendable to 1.1 THz using external mixers. It features 510 MHz analysis bandwidth, full-band real-time spectrum analysis, ±0.19 dB amplitude accuracy, -136 dBc/Hz phase noise, and advanced display and software tools for in-depth signal diagnostics.
Designed for aerospace, defense, and commercial communications, it supports over 75 signal formats and provides fast sweep and power measurements, intuitive 14.1” touchscreen operation, and comprehensive I/O connectivity including USB 3.0, LAN, and GPIB.
Testwall can supply the used Keysight (Agilent) N9040B UXA Signal Analyzer, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) N9040B UXA Signal Analyzer.
