Kikusui
Kikusui PLZ164WA
DC Electronic Load, 0 to 150V, 33A, 165W
165 W Maximum Power
150 V Maximum Voltage
30 A Maximum Current
1.5 V Minimum Operating Voltage
CC, CV, CR, CP Operating Modes
| Attribute | Value |
|---|---|
| Maximum Power | 165 W |
| Maximum Voltage | 150 V |
| Maximum Current | 30 A |
| Minimum Operating Voltage | 1.5 V |
| Operating Modes | CC, CV, CR, CP |
| Input Interface | USB, RS-232C, GP-IB (optional) |
| Transient Response Speed | Fast / Slow selectable |
| Dynamic Mode Frequency Range | 0.001 Hz to 10 kHz |
| Power Supply Requirement | 100–240 V AC, 50/60 Hz |
| Dimensions (W x H x D) | 213 mm x 88 mm x 350 mm (2U half-rack) |
Kikusui PLZ164WA Options:
- PLZ164WA - OP01-PLZ-4W - Accessory kit for external analog input interface connector
- PLZ164WA - PC01-PLZ-4W - Parallel cable (for connecting units in parallel operation)
- PLZ164WA - KRA3 - Rack mount kit for EIA-compliant rack (Type I)
- PLZ164WA - KRA150 - Rack mount kit for JIS-compliant rack (Type I)
- PLZ164WA - DC14-2P3M-M12M8 - High Current Load Wire, 50A max, 14mm², M12/M8 terminals, approx. 3m
- PLZ164WA - DC38-2P3M-M12M8 - High Current Load Wire, 100A max, 38mm², M12/M8 terminals, approx. 3m
- PLZ164WA - DC80-2P3M-M12M8 - High Current Load Wire, 200A max, 80mm², M12/M8 terminals, approx. 3m
| Model | PLZ164WA |
|---|
KIKUSUI PLZ164WA DC ELECTRONIC LOAD The Kikusui PLZ164WA DC Electronic Load is a multifunctional system designed to offer the highest levels of reliability and safety to meet all the testing demands, simulating loads for the characteristic, performance, life cycle, and aging test applications. In Addition to offering high-speed response at a maximum slew rate of 16 A/µs, the Kikusui PLZ164WA is capable of operating in 6 diffe modes including constant voltage, constant cur, constant power and constant resistance mode. Its control unit comes with GPIB, RS232C and USB as standard equipment. The Kikusui PLZ164WA permits a load input up to the rated cur even when the Input Voltage is set for 0V. This feature is required for testing single-cell fuel cells. The built-in three-range configuration of the Kikusui PLZ164WA electronic DC load provides both wide dynamic range and high precision. The Kikusui PLZ164WA can measure the time from load-on to load-off. When combined with under voltage protection (UVP) function, the time from when the battery discharge is started until the battery voltage falls to the cutoff voltage can be measured. Under parallel operation, the same model can be parallel connected to a maximum of 5 units when booster unit is not used. (Max. 5kW, 1000A). Its many features, including zeroV input, make it suitable to meet all the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices that require lower operating voltages. Specifications of the Kikusui PLZ164WA DC Electronic Load include:
