Pacific Power 320-AMX
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 to 300 VAC (single phase) |
| Output Frequency Range | 45 Hz to 500 Hz |
| Output Power Rating | 3000 VA (3 kVA) |
| Output Current | 10 A maximum |
| Input Voltage | 105 to 125 VAC, single phase |
| Input Frequency | 47 Hz to 63 Hz |
| Waveform | True sine wave output |
| Total Harmonic Distortion (THD) | Less than 0.5% at full resistive load |
| Programming Interface | IEEE-488 (GPIB) and RS-232 remote control |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Pacific Power 320-AMX Options:
- 320-AMX - AMXT - Direct/Transformer Selectable Output (45 – 5,000 Hz.) with Ratio 1.5:1, 2.0:1, or 2.5:1 transformer output
- 320-AMX - UPC-3M - Three Phase Manual Control Oscillator/Controller, 15 Hz to 1,200 Hz, no remote interface
- 320-AMX - UPC-3 - Three Phase Programmable Control Oscillator/Controller, 15 Hz to 1,200 Hz, RS-232 Std. / GPIB Optional
- 320-AMX - UPC-32 - Three Phase Programmable Control Oscillator/Controller, 20 Hz to 5,000 Hz, GPIB Std. / RS-232 Optional
- 320-AMX - HAS - Waveform Harmonic Analysis and Synthesis (Voltage and Current)
- 320-AMX - PROG-Z - Programmable Output Impedance
- 320-AMX - LINE-SYNC - Line Sync Option
- 320-AMX - DO-160 - DO-160 / ABD-0100 Avionics Test Sequences (Requires UPC Test Manager)
| Model | 320-AMX |
|---|
Pacific Power 320AMX AC Power Source (Call for availability)
The Pacific Power 320AMX AC power source enables a variety of power conditions and transients to be applied to the device under test while metering and analyzing all output performance parameters. the 320AMX offers low output voltage noise and distortion, ease of installation, and high AC waveform fidelity. Three controller models are available in both manual and programmable control version. All controllers provide manual operation from the front panel. Programmable Controllers may be operated from the front panel or from a remote interface via RS 232 or GPIB.
With the ability to provide either single or two phase output, the 320AMX AC power source is a good choice to convert three-phase line voltage into precisely controlled split (two-phase) or singlephase output power. All Pacific Power 320AMX sources are equipped with a powerful micro-controller with the ability to operate as a fully integrated test system. The output frequency is quartz-crystal stabilized. Output voltages up to 270VL-L in split phase mode and 234VL-L in three phase mode are available on the 320AMX. The exceptionally broad bandwidth (50 kHz small signal), combined with low output impedance and high crest factor ratings give the 320AMX AC power source the ability to produce high quality, low distortion output power into the most dynamic loads.
Specifications of the Pacific Power 320AMX AC Power Source includes:
| AC Power | 2000VA |
| Voltage Low/High | 0-135V/0-270V |
| Frequency | 20-5000Hz |
| Output Cur Low/High | 18A/6A |
| Unit Height | 5U (8.75 in) |
See Datasheet for Full Specifications
