California Instruments
California Instruments 4503L
AC Power Source, 4500VA
4500 VA Moc wyjściowa
0–300 V AC (faza-neutralna) Napięcie wyjściowe
45–500 Hz Częstotliwość wyjściowa
3-fazowy Liczba faz
Do 15 A na fazę Prąd wyjściowy
| Atrybut | Wartość |
|---|---|
| Moc wyjściowa | 4500 VA |
| Napięcie wyjściowe | 0–300 V AC (faza-neutralna) |
| Częstotliwość wyjściowa | 45–500 Hz |
| Liczba faz | 3-fazowy |
| Prąd wyjściowy | Do 15 A na fazę |
| Napięcie zasilania wejściowego | 208 V AC, 3-fazowy |
| Zniekształcenia harmoniczne (THD) | Mniej niż 0,5% przy obciążeniu liniowym |
| Interfejs sterowania | IEEE-488 (GPIB) oraz RS-232 |
| Regulacja napięcia | Programowalna w krokach co 0,1 V |
| Wymiary (szer. × wys. × głęb.) | 483 mm × 222 mm × 686 mm (3U, rack 19") |
California Instruments 4503L Options:
- 4503L - MT - MATE Configuration (includes DFI Connector, Confidence Load, Output Relay, CIIL Language)
- 4503L - LV - Low Output Voltage Ranges (0.67.5V/0-135V) (Not available for Model 4503L)
- 4503L - HV - High Output Voltage Ranges (0.156V/0-312V L-N)
- 4503L - LK - Slave Operation with Clock/Lock (cannot be used with -AX)
- 4503L - AX - Auxiliary 26V/5V Regulated Outputs (cannot be used with -LK)
- 4503L - UP - Input Voltage for 4503L Series (187-456V L-L)
| Model | 4503L |
|---|
California Instruments 4503L AC Power Source The California Instruments 4503L AC power source offers high efficiency with a low distortion sine wave output with either a single or three phase configuration. Control of the output parameters is via IEEE-488 bus, VXI bus or front panel. For avionics applications, the 3-phase models can be configured with 26V and 5V auxilary outputs. Typical applications of the California Instruments 4503L AC power source include power supply testing, quality assurance applications, and any other application where small size, low heat dissipation and light weight are important. Users are able to drive linear loads without detrating, as the California Instruments 4503L AC power source offer full output power with a zero to unity power factor. It can supply up to 4500VA in single phase mode, and 1500VA per phase in 3-phase mode. The frequency ranges from 45-550Hz at full power. The Calfornia Instruments 4503L is self-contained with an imbedded oscillator/controller and the synchronization signal is optically isolated within the power source. Specifications of the California Instruments 4503L AC Power Source includes: See Datasheet for Full Specifications
