California Instruments
California Instruments MX30-3PI
AC DC Power Supply System, 30kVA, 1 and 3 Phase
30 kVA Moc wyjściowa
3 fazy Liczba faz
0–300 V (faza-neutralna) / 0–520 V (faza-faza) Zakres napięcia wyjściowego
45–1000 Hz Zakres częstotliwości wyjściowej
208 V / 220 V / 230 V / 240 V, 3-fazowe Napięcie zasilania wejściowego
| Atrybut | Wartość |
|---|---|
| Moc wyjściowa | 30 kVA |
| Liczba faz | 3 fazy |
| Zakres napięcia wyjściowego | 0–300 V (faza-neutralna) / 0–520 V (faza-faza) |
| Zakres częstotliwości wyjściowej | 45–1000 Hz |
| Napięcie zasilania wejściowego | 208 V / 220 V / 230 V / 240 V, 3-fazowe |
| Zniekształcenia harmoniczne (THD) | Poniżej 0,5% przy obciążeniu liniowym |
| Regulacja napięcia | 0,1 V (rozdzielczość ustawienia) |
| Regulacja częstotliwości | 0,01 Hz (rozdzielczość ustawienia) |
| Interfejs komunikacyjny | GPIB (IEEE-488) oraz RS-232 |
| Wymiary i masa | Obudowa rack 19", montaż szafowy; masa ok. 136 kg |
California Instruments MX30-3PI Options:
- MX30-3PI - -411 - IEC 1000-4-11 test firmware
- MX30-3PI - -LF - Limits maximum frequency to 500 Hz
- MX30-3PI - -FC - Modifies output frequency control to ± 0.25%
- MX30-3PI - -LAN - Ethernet Interface
- MX30-3PI - -HF - Increases max frequency to 905 Hz
- MX30-3PI - -413 - IEC 1000-4-13 Harmonics & Interharmonics test firmware
- MX30-3PI - -HV - Adds 400 V L-N AC-only output range
- MX30-3PI - -XV - Adds other AC-only output range (consult factory)
- MX30-3PI - -LKM - Clock/Lock Master
- MX30-3PI - -LKS - Clock/Lock Auxiliary
- MX30-3PI - -WHM - Watt-Hour Measurement option
- MX30-3PI - -SNK - Bidirectional auto source and sink mode; offers up to 100% power sink capability in AC mode of operation
- MX30-3PI - -SNK-DC - Sink DC current mode
- MX30-3PI - -EXTD - External Drive allows external signal control
- MX30-3PI - -ABD - ABD0100.1.8 Test Option
- MX30-3PI - -AMD - Airbus AMD24 Test
- MX30-3PI - -A350 - Airbus Test Software
- MX30-3PI - -B787 - Boeing 787 Test Software
- MX30-3PI - -160 - RTCA/DO-160D, DO-160E, and EUROCAE test firmware
- MX30-3PI - -704 - Mil Std 704 A-F test firmware/software
| Model | MX30-3PI |
|---|
California Instruments MX30-3PI AC Power Source The California Instruments MX30-3PI high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. This higher power density has been accomplished without the need to resort to elaborate cooling schemes or additional installation wiring. For advanced test applications, the programmable controller version offers full arbitrary waveform generation, time and frequency domain measurements, and voltage and cur waveform capture. These operate using single or three phase output in AC or AC+DC mode. In DC mode, 50% of the AC power level is available. The built-in output transient generation and read-back measurement capability of the MX30-3PI AC power source offers the convenience of a powerful, and easy to use, integrated test system. The MX30-3Pi can deliver up to 240 Amps of repetitive peak cur (150 V AC range) per phase to handle three phase loads. It also allows simulation of unbalanced harmonic line conditions. With a crest factor of up to 3.6, the MX30-3PI AC source can drive difficult nonlinear loads with ease. When combined with the multiphase arbitrary waveform capabilities, the AC and DC output possibilities are truly exceptional. Specifications of the California Instruments MX30-3PI AC Power Source includes: See Datasheet for Full Specifications
