Chroma

Chroma 62015B-80-18

DC Power Supply Module, 80V, 18A, 1440W

80 V Maksymalne napięcie wyjściowe

18 A Maksymalny prąd wyjściowy

1500 W Maksymalna moc wyjściowa

Tak Programowalny zasilacz DC

RS-232, USB, GPIB (opcjonalnie), Ethernet (opcjonalnie) Interfejsy komunikacyjne

Zamów kartę katalogową

Atrybut	Wartość
Maksymalne napięcie wyjściowe	80 V
Maksymalny prąd wyjściowy	18 A
Maksymalna moc wyjściowa	1500 W
Programowalny zasilacz DC	Tak
Interfejsy komunikacyjne	RS-232, USB, GPIB (opcjonalnie), Ethernet (opcjonalnie)
Dokładność napięcia	0,05% + 0,05% zakresu
Dokładność prądu	0,1% + 0,1% zakresu
Współczynnik tętnień i szumów napięcia	≤ 30 mV (RMS)
Wymiary (szer. x wys. x gł.)	425 x 88 x 550 mm (2U)
Zasilanie wejściowe	180–265 V AC, 47–63 Hz

Chroma 62015B-80-18 Options:

62000B - 62000B-3-1 - Three Position 62000B Mainframe
62000B - 62000B-6-1 - Six Position 62000B Mainframe
62015B-80-18 - A620007 - Control & Supervisor Unit
62015B-80-18 - A620008 - CAN Bus Interface for mainframe
62015B-80-18 - A620010 - Rack Mounting Kit for mainframe
62015B-80-18 - A620011 - Ethernet Interface for CSU
62015B-80-18 - A620012 - AD-Link PCI 7841 CAN Bus Card
62015B-80-18 - A620013 - 19" Rack (23U) for 62000B Series
62015B-80-18 - A620014 - 19" Rack (41U) for 62000B Series
62015B-80-18 - A620016 - Rack Mounting Kit for CSU
62015B-80-18 - A620017 - Softpanel for 62000B Series
62015B-80-18 - A620018 - NI USB-8473 high-speed USB to CAN interface
62015B-80-18 - A620019 - USB Interface Control Box for mainframe & CSU
62015B-80-18 - A620020 - GPIB Interface Control Box for mainframe & CSU
62015B-80-18 - A620021 - APG Interface Control Box for mainframe
62015B-80-18 - A620022 - RS-485 Interface Control Box mainframe & CSU

Więcej informacji
Model	62015B-80-18

Chroma 62015B-80-18 The Chroma 62015B-80-18 DC Power Supply Module, with its many unique features, is designed for burn-in applications such as the LCD panels, DC-DC converters, power inverters, notebook computers, battery chargers and many other typs of electronic devices. Its high power density and low cur ripple make it very cost effective. Designed with Modern power factor correction circuitry it meets IEC requirements.
Features and Specifications of the Chroma 62015B-80-18 DC Power Supply Module include:

Features:

N+1 Redundancy
Hot-Swappable Maintenance
Ideal for Burn-in and Plating
High Power Applications with CSU
Remote Sense
Remote ON / OFF
CAN Bus Control
DC OK Signal Output
Voltage range: 1 ~ 80V
Cur range: Up to 2000A (System)
Power range up to 1.5KW per module up to 120KW per system
High Power Density (464 mW / cm3 = 7.13 W/In3)

Specifications:

Electrical Specifications:
- Output Ratings:
  - Output Power: 1440W
  - Output Voltage: 1~80V
  - Output Cur: 1~18A
- LIne Regulation: 0.1% FS
- Load Regulation: 1% FS
- Programming Accuracy: 1% FS
- Measurement Accuracy: 1% FS
- Output Noise (20MHz):
  - Voltage Noised (P-P): 200mV
  - Voltage Ripple (rms): 50mV
  - Cur Ripple (rms): 0.18A
- Efficiency: > 88% @ full load
- Turn On Over Shoot Voltage (Rise Time of 100ms): 5% of nominal output
- Transient Response Time: < 5 ms
- AC Input Voltage:
  - Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz
  - Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz
  - Input Power Factor: > 0.98@ full load
Protection Function:
- OVP: Automatically shuts down at 115% of set value
- Adjustment Range: 1~83V
- OCP: Cur limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.
- OTP: Automatically shuts down if internal limit is reached
I/O Signal:
- Remote ON/OFF (I/P): Dry contact (closed = enabled), vice versa
- AUX Voltage: 4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage)
- DC OK Signal Type (O/P): Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault)
Programming Response Time (Six Position Mainframe through CAN) (Typical):
- Rise Time (Full Load): For a programmed 5% to 95% step in output voltage : 100ms
- Rise Time (No Load): For a programmed 5% to 95% step in output voltage : 100ms
- Fall Time (Full Load): For a programmed 95% to 5% step in output voltage : 40ms
- Fall Time (No Load): For a programmed 95% to 5% step in output voltage : 5s
- Vout Setting: CAN Bus send command to DC module receiver : 1s
- Measurement V & I: Under CAN command using fetch : 100ms
- Delay Time: For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe)
General Specifications:
- Remote Sensing: 3V maximum line loss compensation
- Parallel Operation: Cur Sharing (±5%)
- Operating Temperature: 0 ~ 50°C
- Humidity Range: 0 ~ 90% RH. Non-condensing
- Remote Interface: CAN Bus (optional)
- Safety & EMC: CE

N+1 Redundancy

Hot-Swappable Maintenance

Ideal for Burn-in and Plating

High Power Applications with CSU

Remote Sense

Remote ON / OFF

CAN Bus Control

DC OK Signal Output

Voltage range: 1 ~ 80V

Cur range: Up to 2000A (System)

Power range up to 1.5KW per module up to 120KW per system

High Power Density (464 mW / cm3 = 7.13 W/In3)

Electrical Specifications:

Output Ratings:
- Output Power: 1440W
- Output Voltage: 1~80V
- Output Cur: 1~18A
LIne Regulation: 0.1% FS
Load Regulation: 1% FS
Programming Accuracy: 1% FS
Measurement Accuracy: 1% FS
Output Noise (20MHz):
- Voltage Noised (P-P): 200mV
- Voltage Ripple (rms): 50mV
- Cur Ripple (rms): 0.18A
Efficiency: > 88% @ full load
Turn On Over Shoot Voltage (Rise Time of 100ms): 5% of nominal output
Transient Response Time: < 5 ms
AC Input Voltage:
- Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz
- Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz
- Input Power Factor: > 0.98@ full load

Protection Function:

OVP: Automatically shuts down at 115% of set value
Adjustment Range: 1~83V
OCP: Cur limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.
OTP: Automatically shuts down if internal limit is reached

I/O Signal:

Remote ON/OFF (I/P): Dry contact (closed = enabled), vice versa
AUX Voltage: 4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage)
DC OK Signal Type (O/P): Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault)

Programming Response Time (Six Position Mainframe through CAN) (Typical):

Rise Time (Full Load): For a programmed 5% to 95% step in output voltage : 100ms
Rise Time (No Load): For a programmed 5% to 95% step in output voltage : 100ms
Fall Time (Full Load): For a programmed 95% to 5% step in output voltage : 40ms
Fall Time (No Load): For a programmed 95% to 5% step in output voltage : 5s
Vout Setting: CAN Bus send command to DC module receiver : 1s
Measurement V & I: Under CAN command using fetch : 100ms
Delay Time: For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe)

General Specifications:

Remote Sensing: 3V maximum line loss compensation
Parallel Operation: Cur Sharing (±5%)
Operating Temperature: 0 ~ 50°C
Humidity Range: 0 ~ 90% RH. Non-condensing
Remote Interface: CAN Bus (optional)
Safety & EMC: CE

Output Ratings:

Output Power: 1440W
Output Voltage: 1~80V
Output Cur: 1~18A

LIne Regulation: 0.1% FS

Load Regulation: 1% FS

Programming Accuracy: 1% FS

Measurement Accuracy: 1% FS

Output Noise (20MHz):

Voltage Noised (P-P): 200mV
Voltage Ripple (rms): 50mV
Cur Ripple (rms): 0.18A

Efficiency: > 88% @ full load

Turn On Over Shoot Voltage (Rise Time of 100ms): 5% of nominal output

Transient Response Time: < 5 ms

AC Input Voltage:

Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz
Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz
Input Power Factor: > 0.98@ full load

Output Power: 1440W

Output Voltage: 1~80V

Output Cur: 1~18A

Voltage Noised (P-P): 200mV

Voltage Ripple (rms): 50mV

Cur Ripple (rms): 0.18A

Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz

Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz

Input Power Factor: > 0.98@ full load

OVP: Automatically shuts down at 115% of set value

Adjustment Range: 1~83V

OCP: Cur limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.

OTP: Automatically shuts down if internal limit is reached

Remote ON/OFF (I/P): Dry contact (closed = enabled), vice versa

AUX Voltage: 4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage)

DC OK Signal Type (O/P): Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault)

Rise Time (Full Load): For a programmed 5% to 95% step in output voltage : 100ms

Rise Time (No Load): For a programmed 5% to 95% step in output voltage : 100ms

Fall Time (Full Load): For a programmed 95% to 5% step in output voltage : 40ms

Fall Time (No Load): For a programmed 95% to 5% step in output voltage : 5s

Vout Setting: CAN Bus send command to DC module receiver : 1s

Measurement V & I: Under CAN command using fetch : 100ms

Delay Time: For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe)

Remote Sensing: 3V maximum line loss compensation

Parallel Operation: Cur Sharing (±5%)

Operating Temperature: 0 ~ 50°C

Humidity Range: 0 ~ 90% RH. Non-condensing

Remote Interface: CAN Bus (optional)

Safety & EMC: CE

Chroma 62015B-80-18

Chroma 62015B-80-18 Options:

No Related Posts

Powiązane produkty