EMC
EMC Partner ESD3000
ESD Simulator, 30 kV
Do 30 kV Poziom napięcia testowego ESD
IEC 61000-4-2, ISO 10605 Zgodność z normami
Wyładowanie kontaktowe i powietrzne Tryby wyładowania
Dodatnia i ujemna Polaryzacja impulsu
≤ 0,8 ns (zgodnie z IEC 61000-4-2) Czas narastania impulsu
| Atrybut | Wartość |
|---|---|
| Poziom napięcia testowego ESD | Do 30 kV |
| Zgodność z normami | IEC 61000-4-2, ISO 10605 |
| Tryby wyładowania | Wyładowanie kontaktowe i powietrzne |
| Polaryzacja impulsu | Dodatnia i ujemna |
| Czas narastania impulsu | ≤ 0,8 ns (zgodnie z IEC 61000-4-2) |
| Impedancja wyjściowa | 330 Ω / 150 pF (sieć symulacyjna człowieka) |
| Częstotliwość powtarzania impulsów | Do 20 impulsów na sekundę |
| Interfejs sterowania | Wbudowany panel sterowania z wyświetlaczem LCD |
| Zasilanie | 100–240 V AC, 50/60 Hz |
| Wymiary i masa | Kompaktowa obudowa przenośna, przystosowana do użytku laboratoryjnego |
| Model | Partner |
|---|
The EMC Partner ESD3000 is the only 30 kV ESD Simulator which is both battery operated and completely hand-held, eliminating base unit, external power supply, and power supply tether cable associated with other ESD simulators. Full range of easily interchangeable R-C discharge modules ensures the ESD 3000 meets your changing ESD testing requirements. Light weight, comfortable ergonomics, easy intuitive single-handed operation, clear back-lit LCD display showing all test parameters, and 10 on-board pre-programmable non-volatile memory locations to store ESD test routines; these are just some of the reasons experienced test technicians and engineers applaud the ESD 3000 as the best ESD simulator available. The low purchase price, use of standard consumer NiMH AA size rechargeable batteries, and proven reliability make the ESD3000 easy to justify to management concerned about minimizing operational costs. It even has a pulse counter built-in.The ESD 3000 is a fully automated and programmable ESD simulator. It identifies which discharge module is installed and has a level selector button enabling the user to quickly scroll through and select the voltage from the levels appropriate to the standard and discharge mode. The set pulse count is executed with a single pull of the trigger in either air or direct contact mode. Polarity can be programmed to alternate or can be changed with the push of the +/- button at any time. Voltage can be programmed to ramp up or down or quickly changed at any time by using the up and down arrow buttons.The EMC Partner ESD3000 can be applied to a wide range of test standards. Solutions for the standards listed below are available now. If your standard is not shown, then please let us know. New and custom discharge networks can be produced readily.Applicable Standards: IEC 61000-4-2 IEC 61340-3-1 IEC 61340-3-2 I SO TR10605 MIL 883 MIL-STD-1512 GR-78-CORE RTCA DO 160 *Note ESD3000M1 Discharge Module available separately. EMC Partner ESD3000 Possible Substitutes: Teseq (Schaffner) NSG438 ESD Simulator, 30 kV
