Espec

Espec SH-242

Temperature & Humidity Chamber, -40C to 150C, 0.8 Cu Ft
-40°C do +150°C Zakres temperatury
20% do 98% RH Zakres wilgotności
242 litrów Pojemność komory
600 mm x 500 mm x 800 mm Wymiary wewnętrzne (szer. x gł. x wys.)
950 mm x 900 mm x 1850 mm Wymiary zewnętrzne (szer. x gł. x wys.)
Zamów kartę katalogową
Atrybut Wartość
Zakres temperatury -40°C do +150°C
Zakres wilgotności 20% do 98% RH
Pojemność komory 242 litrów
Wymiary wewnętrzne (szer. x gł. x wys.) 600 mm x 500 mm x 800 mm
Wymiary zewnętrzne (szer. x gł. x wys.) 950 mm x 900 mm x 1850 mm
Zasilanie 200-230 V, 3-fazowy, 50/60 Hz
Sterownik Programowalny sterownik cyfrowy z możliwością zapisu profili temperatury i wilgotności
Czynnik chłodniczy R404A / R23 (kaskadowy układ chłodzenia)
Szybkość zmiany temperatury Do 3°C/min (nagrzewanie), do 1°C/min (chłodzenie)
Normy zgodności IEC 60068, JIS C 60068 (komora do badań temperatury i wilgotności)
Espec SH-242 Options:
  • SH-242 - Viewing Window (Door) - Viewing window on chamber door with transparent metal depositioned thin film heater to prevent fogging; Effective view: W215×H215 mm
  • SH-242 - Roof Top Viewing Window - Viewing window mounted on top of chamber; Effective view: W181×D107 mm
  • SH-242 - Inner Glass Door - Glass door between test area and chamber door for wide-view observation; equipped with wiper for humidity models
  • SH-242 - Hand-in Port (Inner Glass Door) - φ130mm ×1 hand-in port at center of inner glass door with radial rubber seal
  • SH-242 - Hand-in Port (Side Wall) - φ130mm ×1 hand-in port on left or right chamber side wall with radial rubber seal
  • SH-242 - Additional Cable Port (Left/Right Side) - Additional cable port on left or right side; available in φ25mm, φ50mm, φ100mm, or flat cable port (W100×H25mm)
  • SH-242 - Additional Cable Port (Ceiling) - Additional cable port on ceiling; available in φ25mm, φ50mm, φ100mm, or flat cable port (W100×H25mm)
  • SH-242 - Cable Port Rubber Plug (φ25mm) - Rubber plug for φ25mm cable port
  • SH-242 - Cable Port Rubber Plug (φ50mm) - Rubber plug for φ50mm cable port
  • SH-242 - Cable Port Rubber Plug (φ100mm) - Rubber plug for φ100mm cable port
  • SH-242 - Cable Port Rubber Plug (Spiral-wrapped) - Spiral-wrapped plug 5×50×2000mm
  • SH-242 - Cable Port Rubber Plug (Flat Cable) - Rubber plug for flat cable port
  • SH-242 - EZ Connect Cable Port Plug - Cable port plug with embedded terminals (inside and outside); Spec: AC 6 to 250V 0.1 to 3A; Connector Type: Block 10P (+5P, -5P); Temp Range: -70 to +180°C, 30 to 95%rh
  • SH-242 - Continuous Water Supply (With Pressure-Reducing Valve) - Connection port with pressure-reducing valve for continuous water supply
  • SH-242 - Continuous Water Supply (Without Pressure-Reducing Valve) - Connection port without pressure-reducing valve for continuous water supply
  • SH-242 - Roof Top Water Tank - Additional 5L water tank on chamber ceiling for extended continuous operation
  • SH-242 - Automatic Water Refill - Automatically refills water to humidifying tray and wick pan periodically
  • SH-242 - Wet-bulb Wick - Replacement wet-bulb wick; 1 box (24 wicks, 1 dropper)
  • SH-242 - Power Plug (China) - Power plug for China; 3 cores/round type
  • SH-242 - Noise Reduction Rear Cover - Rear cover to lower noise, direct exhaust air toward ceiling, and store wires
  • SH-242 - Cable Organizer Kit - Kit including cable ties, magnetic cable cover, and dew tray
  • SH-242 - Interface RS-485 - RS-485 communication port to connect chamber to a PC
  • SH-242 - Interface RS-232C - RS-232C communication port to connect chamber to a PC
  • SH-242 - Interface GPIB - GPIB communication port to connect chamber to a PC
  • SH-242 - Communication Cable RS-485 (5m) - RS-485 communication cable, 5m
  • SH-242 - Communication Cable RS-485 (10m) - RS-485 communication cable, 10m
  • SH-242 - Communication Cable RS-485 (30m) - RS-485 communication cable, 30m
  • SH-242 - Communication Cable RS-232C (1.5m) - RS-232C communication cable, 1.5m
  • SH-242 - Communication Cable RS-232C (3m) - RS-232C communication cable, 3m
  • SH-242 - Communication Cable RS-232C (6m) - RS-232C communication cable, 6m
  • SH-242 - Communication Cable GPIB (2m) - GPIB communication cable, 2m
  • SH-242 - Communication Cable GPIB (4m) - GPIB communication cable, 4m
  • SH-242 - Paperless Recorder (Portable) - Portable paperless recorder; Sampling interval: 5 sec.; Flash memory 8MB; CF card port + USB port; Temp 1 + Humidity 1 inputs (4 more channels available)
  • SH-242 - Paperless Recorder (Option Box Installed) - Paperless recorder installed on option box; Temp 1 + Humidity 1 inputs (4 more channels available)
  • SH-242 - Temperature & Humidity Recorder - Dot recording type; effective width 100mm paper; Temp 5 + Humidity 1 inputs; ranges: -50 to +150°C / -100 to +150°C / -100 to +200°C with 0 to 100%rh
  • SH-242 - Thermocouple (2m) - Type T thermocouple with brass ball tip for specimen temperature measurement, 2m
  • SH-242 - Thermocouple (4m) - Type T thermocouple with brass ball tip for specimen temperature measurement, 4m
  • SH-242 - Thermocouple (6m) - Type T thermocouple with brass ball tip for specimen temperature measurement, 6m
  • SH-242 - Wet-bulb Temperature Recorder Output Terminal - Terminal to output test area wet bulb temperature
  • SH-242 - External Output Terminal Set (×3) - Time up output terminal, time signal terminal, and temp/humidity SP attainment output; requires option box
  • SH-242 - Program-synched DC Power Supply (5V) - 5V DC power supply synchronized with chamber program for bias testing
  • SH-242 - Program-synched DC Power Supply (12V) - 12V DC power supply synchronized with chamber program for bias testing
  • SH-242 - Program-synched DC Power Supply (15V) - 15V DC power supply synchronized with chamber program for bias testing
  • SH-242 - Program-synched DC Power Supply (24V) - 24V DC power supply synchronized with chamber program for bias testing
  • SH-242 - Program-synched DC Power Supply (48V) - 48V DC power supply synchronized with chamber program for bias testing
  • SH-242 - Option Box - Box for installing additional options (paperless recorder, external output terminal set, specimen temperature control, program-synched DC power supply); standalone or stand-embedded
  • SH-242 - Shelf (Additional) - Additional 18-8 Cr-Ni stainless steel shelf; load capacity 0.5kg; effective dimensions W284×H34×D231mm
  • SH-242 - Specimen Basket - Stainless steel basket for small specimens; W206×H40×D156mm
  • SH-242 - Airflow Adjuster - Used for tests requiring low or constant airflow velocity; 4 setting levels
  • SH-242 - Specimen Temperature Control (Insulated Type) - Sensors attached to specimen for temperature stress exposure tests
  • SH-242 - Overcool Protector - Stops chamber if temperature decreases excessively to prevent specimen damage
  • SH-242 - Emergency Stop Pushbutton (Without Guard) - Immediately stops chamber operation
  • SH-242 - Emergency Stop Pushbutton (With Guard) - Immediately stops chamber operation; includes guard
  • SH-242 - External Device Alarm Input Terminal - Terminal to stop chamber if linked external device malfunctions
  • SH-242 - Door Opening Signal Output Terminal - Terminal that outputs door open status for external device control and temperature disturbance history recording
  • SH-242 - Chamber Dew Tray - Prevents water leaks from chamber onto floor
  • SH-242 - Stand C Type (Dolly) - Dolly-type stand with casters and leveling feet; Depth 860(750)mm; W540(440)mm
  • SH-242 - Stand L Type (Low) - Low-type stand with casters and leveling feet; available with shelf, option box, 19-inch rack, or water tank (18L capacity)
  • SH-242 - Stand M Type - Mid-type stand with casters; available with shelf or water tank (20L/10L capacity)
  • SH-242 - Stand H Type - High-type stand with casters; C type stand fits on lower part; available with shelf, option box, or 19-inch rack
  • SH-242 - Operation Manual (CD) - Operation manual on CD
  • SH-242 - Operation Manual (Booklet) - Operation manual in booklet form
  • SH-242 - Testing and Inspection Report - Report documenting testing and inspection results
  • SH-242 - Test Data - Test data documentation
  • SH-242 - Temperature & Humidity Uniformity Measurement - Uniformity measurement report
  • SH-242 - Calibration Report - Calibration report documentation
  • SH-242 - Calibration Certificate - Calibration certificate documentation
  • SH-242 - Traceability System Chart - Traceability system chart documentation
  • SH-242 - Traceability Certificate - Traceability certificate documentation
Formularz kalibracji Espec SH-242

Formularz naprawy Espec SH-242
Maximum file size: 40MB

No Related Posts

Więcej informacji
ModelSH-242

Komora Espec SH-242 to urządzenie o średniej pojemności z zaawansowanym systemem kontroli środowiska, zaprojektowane do precyzyjnych testów komponentów i materiałów. Solidna konstrukcja zapewnia długotrwałą wydajność, idealną dla laboratoriów i zastosowań przemysłowych wymagających dokładnej walidacji produktów.

Komora zapewnia stabilne i niezawodne warunki, wspierając badania, kontrolę jakości oraz testy przemysłowe. Szczególnie sprawdza się w długich cyklach, gdzie kluczowa jest stabilność i trwałość.

Testwall może dostarczyć używaną komorę Espec SH-242, w pełni przetestowaną. Dzięki wsparciu ekspertów i globalnej dostawie, Testwall zapewnia wysokiej klasy aparaturę o niezrównanej niezawodności i jakości usług. Prosimy o bezpośredni kontakt w sprawie kalibracji lub naprawy Espec SH-242.

Clicky