Keysight (Agilent)
Keysight (Agilent) 37717C
Communications Performance Analyser
SDH/SONET Interfejs
do 2,5 Gbit/s (STM-16/OC-48) Maksymalna szybkość transmisji
SDH, SONET, PDH, ATM Obsługiwane standardy
Analizator sieci transmisji synchronicznej Rodzaj analizatora
Tak, wbudowany pomiar współczynnika błędów bitowych Pomiar BER
| Atrybut | Wartość |
|---|---|
| Interfejs | SDH/SONET |
| Maksymalna szybkość transmisji | do 2,5 Gbit/s (STM-16/OC-48) |
| Obsługiwane standardy | SDH, SONET, PDH, ATM |
| Rodzaj analizatora | Analizator sieci transmisji synchronicznej |
| Pomiar BER | Tak, wbudowany pomiar współczynnika błędów bitowych |
| Generowanie i analiza alarmów | Tak, obsługa alarmów SDH/SONET oraz błędów PDH |
| Złącza wejścia/wyjścia | Optyczne i elektryczne złącza zgodne ze standardami SDH/SONET |
| Zasilanie | 100–240 V AC, 50/60 Hz |
| Zakres temperatur pracy | 0°C do +50°C |
| Wymiary (S x W x G) | Forma przenośna, format przyrządu laboratoryjnego |
Keysight Technologies 37717C Options:
- 37717C - UKK - Unstructured PDH testing: 0.7, 2, 8, 34 and 140 Mb/s interfaces plus an error output
- 37717C - UKJ - Structured PDH testing: 2, 8, 34 and 140 Mb/s interfaces (64 kb/s and n x 64 kb/s testing)
- 37717C - UKN - ATM cell generation and analysis: 2, 34 and 140 Mb/s interfaces (includes all capability of option UKJ)
- 37717C - 110 - Structured DSn/PDH testing: DS1, DS3, E1 and E3 interfaces (64 kb/s, 56 kb/s, n x 64 kb/s and n x 56 kb/s testing)
- 37717C - UKZ - ATM cell generation and analysis: DS1, DS3, E1 and E3 interfaces (equivalent to 1.5 Mb/s, 45 Mb/s, 2 Mb/s, 34 Mb/s)
- 37717C - A3R - SDH test module: STM-0e (52 Mb/s) and STM-1e (155 Mb/s) electrical interfaces, STM-0/STM-1 overhead access, thru mode and pointer sequence generation, TU-12, TU-2, VC-3 and VC-4 mappings plus frequency offset generation, alarm and error generation/detection, SDH alarm and BIP scan, tributary scan and protection switch times
- 37717C - 120 - SONET/SDH test module: STS-1/STM-0e (52 Mb/s) and STS-3/STM-1e (155 Mb/s) electrical interfaces, overhead access, thru mode and pointer sequence generation, VT1.5/TU-11, VT2/TU-12, VT6/TU-2, STS-1/VC-3 SPE and STS-3c/VC-4 SPE mappings, alarm and error generation/detection, BIP scan, tributary scan and protection switch times
- 37717C - A1T - STM-1e (155 Mb/s) electrical interface: overhead access, thru mode and pointer sequences, TU-12, TU-2, VC-3 and VC-4 mappings (without STM-0e capability and without error output)
- 37717C - 140 - PDH jitter generation: 2, 8, 34 and 140 Mb/s up to 80 UI (2 Mb/s); SDH jitter generation: STM-1 (155 Mb/s) and STM-4 (622 Mb/s) up to 200 UI (STM-4)
- 37717C - A3K - All capability of option 140 plus wander generation: 2 Mb/s, STM-1 (155 Mb/s) and STM-4 (622 Mb/s) up to 14400 UI (STM-4)
- 37717C - UHN - PDH (tributary) jitter and wander measurement: 2, 8, 34, 140 Mb/s with HP1, HP2 and LP filters to ITU-T O.171 plus 2 Mb/s wander and estimated frame slip measurement
- 37717C - A3L - STM-1e line jitter and PDH (tributary) jitter; rms, peak-to-peak, auto jitter transfer and wander measurement: 155 Mb/s electrical interface with HP1, HP2, LP and 12 kHz HP filters to ITU-T O.171/G.825
- 37717C - A3V - STM-1o/STM-1e, plus all the capability of option A3L
- 37717C - A3N - STM-4o/STM-1o/STM-1e, plus all the capability of option A3L (includes 622 Mb/s jitter measurement)
- 37717C - 0YK - ATM and AAL capabilities including Channel View, rate history, graphical CDV, benchmark traffic (must also order option UKN or UKZ)
- 37717C - USL - As per option 0YK plus native Ethernet LAN connectivity tests (must also order option UKN or UKZ)
- 37717C - UH3 - PDH NRZ interfaces: binary Tx clock and data, binary Rx clock and data, plus external clock input
- 37717C - 200 - PDH synthesized BER testing bundle: includes UH3 (binary clock and data), UKK (unstructured BER module) and HP 8647A synthesizer
- 37717C - UH1 - 155 Mb/s optical interface: 1310 nm, -9 dBm output (reserved optical slot)
- 37717C - 130 - 622/155/52 Mb/s optical interfaces: dual wavelength at 1310 nm (-10 dBm) and 1550 nm (-1 dBm); includes STM-4/OC-12c overhead access, thru mode and optical power measurement
- 37717C - 131 - 622/155/52 Mb/s optical interfaces: 1310 nm, -10 dBm output; includes STM-4c/OC-12c overhead access, thru mode and optical power measurement
- 37717C - USN - 622/155 Mb/s optical interfaces: dual wavelength at 1310 nm and 1550 nm (-10 dBm / -1 dBm); includes overhead access, thru mode and optical power measurement
- 37717C - UKT - 622/155 Mb/s optical interfaces: 1310 nm, -10 dBm output; includes overhead access, thru mode and optical power measurement (easily upgradeable to dual wavelength)
- 37717C - 0YH - 622/155/52 Mb/s binary (NRZ) interfaces: 50 ohm ECL Tx data and Tx clock outputs, plus Rx data and Rx clock inputs (must also order option 130 or 131)
- 37717C - UHC - Three additional 2, 8, 34 and 140 Mb/s outputs (must also order option UKK, UKJ or UKN)
- 37717C - A3D - RS-232-C and HP-IB remote-control/external-printer interfaces (reserved remote slot)
- 37717C - A3B - LAN remote control, RS-232-C and HP-IB remote-control/external-printer interfaces (reserved remote slot)
- 37717C - UKX - Integrated, full-width, 80-column graphics printer (for printing of graphics, results and screen dumps)
- 37717C - UH4 - FC/PC optical adaptor
- 37717C - UH5 - DIN47526 optical adaptor
- 37717C - UH6 - ST optical adaptor
- 37717C - UH7 - Biconic optical adaptor
- 37717C - UH8 - NEC D4 optical adaptor
- 37717C - UKP - SC optical adaptor
- 37717C - UKQ - HMS-10/HP optical adaptor
- 37717C - USS - Distributed network analyzer firmware for use with HP E4540A distributed network analyzer software for Windows (must also order remote-control/external-printer interface)
- 37717C - AVA - Calibration manual
- 37717C - OB2 - One additional operating manual
- 37717C - OBF - One additional remote operation manual
- 37717C - UK6 - Calibration certificate
| Model | 37717C |
|---|
Keysight (Agilent) OmniBER 717C to przenośny, wielostopniowy analizator wydajności komunikacyjnej obsługujący do 622 Mb/s do testowania sieci hybrydowych PDH/SDH/SONET oraz ATM. Wykonuje analizę BER i jittera na interfejsach optycznych i elektrycznych, z obsługą standardów SONET/SDH. Zaprojektowany zarówno do użytku w terenie, jak i w środowiskach produkcyjnych, umożliwia szybkie przełączanie konfiguracji i zdalne sterowanie urządzeniem. Modułowe opcje obejmują STM-1e, STM-4o, PDH, testy jittera/wandra, ładunki ATM oraz różnorodne kombinacje interfejsów optycznych.
Analizator ten usprawnia instalację, uruchomienie i konserwację nowoczesnych systemów transportu telekomunikacyjnego.
Testwall może dostarczyć używany Keysight (Agilent) OmniBER 717C, w pełni przetestowany. Dzięki profesjonalnemu wsparciu i globalnej dostawie, Testwall gwarantuje wysokowydajną aparaturę z niezrównaną niezawodnością i jakością usług. Skontaktuj się z nami, jeśli potrzebujesz kalibracji lub naprawy Keysight (Agilent) OmniBER 717C.
