Manufacturer Logo
Keysight (Agilent)

Keysight (Agilent) NA5205A

4-portowy analizator sieci PNA-X Pro, 10 MHz – 50 GHz (zdjęcie poglądowe)
od 10 MHz do 50 GHz Zakres częstotliwości
4 Liczba portów
144 dB (spec.) Zakres dynamiki
maks. +12 dBm Zakres mocy wyjściowej
2 Źródła wewnętrzne
Zamów kartę katalogową
Atrybut Wartość
Zakres częstotliwości od 10 MHz do 50 GHz
Liczba portów 4
Zakres dynamiki 144 dB (spec.)
Zakres mocy wyjściowej maks. +12 dBm
Źródła wewnętrzne 2
Impedancja 50 Ω
Typ złącza 2,4 mm męskie
Pasmo IF 1 Hz … 15 MHz
Liczba punktów maks. 100 003
Szum śladu 0,002 dB rms
Parametry pomiarowe parametry S, współczynnik szumów (opc.), kompresja wzmocnienia, IMD, impulsowe RF, analiza widma (opc.), szum fazowy (opc.)
Wyświetlacz 12,1" LCD, 1280×800, dotykowy
Interfejsy LAN, USB, USB-C, 2× GPIB, DisplayPort
Seria PNA-X Pro
Keysight (Agilent) NA5205A Options:
  • NA5205A - 201 - 2-port base model with six front-panel access loops
  • NA5205A - 231 - 2-port configurable test set with source attenuators
  • NA5205A - 239 - 2-port configurable test set, source attenuators, noise receiver
  • NA5205A - 241 - 2-port configurable test set, source attenuators, bias tees, noise receiver
  • NA5205A - 401 - 4-port base model with twelve front-panel access loops
  • NA5205A - 431 - 4-port configurable test set, source attenuators, two sources
  • NA5205A - 441 - 4-port configurable test set, source attenuators, bias tees, two sources
  • NA5205A - 449 - 4-port configurable test set, source attenuators, bias tees, noise receiver, two sources
  • NA5205A - 489 - 4-port configurable test set, source attenuators, bias tees, combiner, noise receiver, two sources
  • NA5205A - 2RA - Receiver attenuators on all ports (2-port)
  • NA5205A - 4RA - Receiver attenuators on all ports (4-port)
  • NA5205A - UNY - Enhanced low phase noise
  • NA5205A - D1F - IF access
  • NA5205A - W1F - Wide IF bandwidth (up to 100 MHz)
  • NA5205A - PM1 - Pulse modulation on RF source 1
  • NA5205A - S93010B - Time-domain analysis (software)
  • NA5205A - S93029B - Noise figure measurements (software)
  • NA5205A - S93080B - Frequency offset measurements (software)
  • NA5205A - S93083B - Vector and scalar mixer/converter measurements (software)
  • NA5205A - S93086B - Gain compression measurements (software)
  • NA5205A - S93087B - Intermodulation distortion measurements (software)
  • NA5205A - S93090xB - Spectrum analysis (software)
Formularz kalibracji Keysight (Agilent) NA5205A

Formularz naprawy Keysight (Agilent) NA5205A
Maximum file size: 40MB

Keysight (Agilent) NA5205A to 4-portowy analizator wektorowy sieci serii PNA-X Pro o zakresie od 10 MHz do 50 GHz.

Testwall może dostarczyć używany Keysight (Agilent) NA5205A, w pełni przetestowany. Dzięki fachowemu wsparciu i globalnej dostawie Testwall zapewnia wysokowydajną aparaturę pomiarową o niezrównanej niezawodności i jakości obsługi. Skontaktuj się z nami, jeśli potrzebujesz kalibracji lub naprawy Keysight (Agilent) NA5205A.

Clicky