Pacific Power

Pacific Power 320-AMX

AC Power Source, 2000VA, 135/270V, 18/6A, 3 Phase
3000 VA Moc wyjściowa
Jednofazowy Liczba faz
0 – 300 V AC Zakres napięcia wyjściowego
45 – 500 Hz Częstotliwość wyjściowa
10 A Prąd wyjściowy (maksymalny)
Zamów kartę katalogową
Atrybut Wartość
Moc wyjściowa 3000 VA
Liczba faz Jednofazowy
Zakres napięcia wyjściowego 0 – 300 V AC
Częstotliwość wyjściowa 45 – 500 Hz
Prąd wyjściowy (maksymalny) 10 A
Napięcie zasilania wejściowego 208 – 240 V AC
Zniekształcenia harmoniczne (THD) Mniej niż 0,5%
Interfejs sterowania Analogowy oraz opcjonalny interfejs IEEE-488 / RS-232
Wymiary (szer. x wys. x gł.) 483 x 133 x 508 mm
Masa Około 27 kg
Pacific Power 320-AMX Options:
  • 320-AMX - AMXT - Direct/Transformer Selectable Output (45 – 5,000 Hz.) with Ratio 1.5:1, 2.0:1, or 2.5:1 transformer output
  • 320-AMX - UPC-3M - Three Phase Manual Control Oscillator/Controller, 15 Hz to 1,200 Hz, no remote interface
  • 320-AMX - UPC-3 - Three Phase Programmable Control Oscillator/Controller, 15 Hz to 1,200 Hz, RS-232 Std. / GPIB Optional
  • 320-AMX - UPC-32 - Three Phase Programmable Control Oscillator/Controller, 20 Hz to 5,000 Hz, GPIB Std. / RS-232 Optional
  • 320-AMX - HAS - Waveform Harmonic Analysis and Synthesis (Voltage and Current)
  • 320-AMX - PROG-Z - Programmable Output Impedance
  • 320-AMX - LINE-SYNC - Line Sync Option
  • 320-AMX - DO-160 - DO-160 / ABD-0100 Avionics Test Sequences (Requires UPC Test Manager)
Formularz kalibracji Pacific Power 320-AMX

Formularz naprawy Pacific Power 320-AMX
Maximum file size: 40MB

No Related Posts

Więcej informacji
Model320-AMX

 Pacific Power 320AMX AC Power Source (Call for availability)

 

    The Pacific Power 320AMX AC power source enables a variety of power conditions and transients to be applied to the device under test while metering and analyzing all output performance parameters.   the 320AMX offers low output voltage noise and distortion, ease of installation, and high AC waveform fidelity.  Three controller models are available in both manual and programmable control version. All controllers provide manual operation from the front panel. Programmable Controllers may be operated from the front panel or from a remote interface via RS 232 or GPIB.  

    With the ability to provide either single or two phase output, the 320AMX AC power source is a good choice to convert three-phase line voltage into precisely controlled split (two-phase) or singlephase output power.  All Pacific Power 320AMX sources are equipped with a powerful micro-controller with the ability to operate as a fully integrated test system.  The output frequency is quartz-crystal stabilized. Output voltages up to 270VL-L in split phase mode and 234VL-L in three phase mode are available on the 320AMX.  The exceptionally broad bandwidth (50 kHz small signal), combined with low output impedance and high crest factor ratings give the 320AMX AC power source the ability to produce high quality, low distortion output power into the most dynamic loads.

 

Specifications of the Pacific Power 320AMX AC Power Source includes:

AC Power 2000VA
Voltage Low/High 0-135V/0-270V
Frequency 20-5000Hz
Output Cur Low/High 18A/6A
Unit Height 5U (8.75 in)

 

See Datasheet for Full Specifications

 

Clicky