0 items - €0.00
0
- Brak produktów w koszyku.
Amplifier Research 60S4G11
Wzmacniacz RF 4 – 10,6 GHz 60 W.
| Producent: | |
| Model: | Amplifier Research 60S4G11 |
| Opis: | Wzmacniacz RF 4 - 10,6 GHz 60 W. |
| Arkusz danych PDF: | Amplifier Research 60S4G11 |
|
|
|
Amplifier Research 60S4G11 The Amplifier Research 60S4G11 is a portable, self-contained, air-cooled, broadband, solid-state amplifier designed for applications that require instantaneous bandwidth, high gain and linearity. Features and Specifications of the Amplifier Research 60S4G11 Amplifier include:
- Provides a minimum of 60 watts of RF power when used with a sweep generator
- Digital Control Panel (DCP):
- Provides both local and remote control of the amplifier
- Uses a graphic liquid Crystal Display:
- Provides operational presentation of forward power and reflected power
- Provides control status
- Provides reports of internal amplifier status
- Uses menu assigned softkeys
- Uses a single rotary knob
- Uses a dedicated on/off switch
- Offers extensive control and status reporting capability
- Special features:
- Gain control
- Internal/external automatic level control (ALC) with front panel control of the ALC threshold
- Pulse input capability
- RF output level protection
- Internal RF detector which provides an output for use in self-testing or operational modes
- All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
- Bus interface connection on back panel
- Keylock on front panel assures positive control of local or remote operation
- Low spurious signals, linearity, and load tolerance make it ideal for these various uses:
- RF susceptibility testing
- Antenna/component testing
- Communication technology testing
- As a test instrument covering multiple frequency bands
- Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.
- Expandable power, versatility, and upgrade capability
- Consists of three 20S4G11 sub-amplifiers housed in a single equipment rack with a controller:
- Functions as one amplifier
- Or be separated into three individual 20S4G11 amplifiers that can each be used independently
- Rated output power: 60 watts minimum
- Power output @ 3dB compression:
- Nominal: 70 watts
- Minimum: 60 watts
- Power output @ 1dB compression:
- Nominal: 60 watts
- Minimum: 50 watts
- Flatness:
- typical: ±2.0 dB
- maximum: ±3.0 dB
- Frequency response: 4.0 – 10.6 GHz instantaneously
- Input for rate output: 1.0 milliwatt maximum, 0 dBm
- Gain (at maximum setting): 47.8 dB minimum
- Gain adjustment (continuous range): 10 dB minimum
- Input impedance: 50 ohms, VSWR 2.5:1 maximum
- Output impedance: 50 ohms, nominal
- Mismatch tolerance:
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- Harmonic distortion: Minus 20 dBc maximum at 60 watts
- Third order intercept point: 56 dBm typical
- RF power display: Digital, forward, and reflected
- Primary power (selected automatically):
- 90-132, 180-264VAC
- 50/60 Hz, single phase
- Connectors:
- RF input: Type N female on front panel
- RF output: Type N female on rear panel
- External leveling inputs: Type BNC female on front panel
- Pulse modulation input: Type BNC female on front panel
- Detected RF output: Type BNC female on front panel
- Remote interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Sub-Amplifier interface: RJ-45
- Safety interlock: 15 pin Subminiature D
- Cooling: Forced air (self contained fans)
- Provides both local and remote control of the amplifier
- Uses a graphic liquid Crystal Display:
- Provides operational presentation of forward power and reflected power
- Provides control status
- Provides reports of internal amplifier status
- Uses menu assigned softkeys
- Uses a single rotary knob
- Uses a dedicated on/off switch
- Offers extensive control and status reporting capability
- Gain control
- Internal/external automatic level control (ALC) with front panel control of the ALC threshold
- Pulse input capability
- RF output level protection
- RF susceptibility testing
- Antenna/component testing
- Communication technology testing
- As a test instrument covering multiple frequency bands
- Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.
- Functions as one amplifier
- Or be separated into three individual 20S4G11 amplifiers that can each be used independently
- Provides operational presentation of forward power and reflected power
- Provides control status
- Provides reports of internal amplifier status
- Nominal: 70 watts
- Minimum: 60 watts
- Nominal: 60 watts
- Minimum: 50 watts
- typical: ±2.0 dB
- maximum: ±3.0 dB
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- 90-132, 180-264VAC
- 50/60 Hz, single phase
- RF input: Type N female on front panel
- RF output: Type N female on rear panel
- External leveling inputs: Type BNC female on front panel
- Pulse modulation input: Type BNC female on front panel
- Detected RF output: Type BNC female on front panel
- Remote interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Sub-Amplifier interface: RJ-45
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
Amplifier Research 60S4G11 - Datasheet (53 KB)