Sorensen
Sorensen SGA10X1K2
DC Power Supply, 10V, 1200A, 12kW
0 – 10 V Napięcie wyjściowe
0 – 1200 A Prąd wyjściowy
12 000 W (12 kW) Moc wyjściowa
208/220 V AC, trójfazowe Napięcie wejściowe
47 – 63 Hz Częstotliwość wejściowa
| Atrybut | Wartość |
|---|---|
| Napięcie wyjściowe | 0 – 10 V |
| Prąd wyjściowy | 0 – 1200 A |
| Moc wyjściowa | 12 000 W (12 kW) |
| Napięcie wejściowe | 208/220 V AC, trójfazowe |
| Częstotliwość wejściowa | 47 – 63 Hz |
| Regulacja napięcia (obciążenie) | ≤ 0,05% + 5 mV |
| Regulacja prądu (obciążenie) | ≤ 0,05% + 30 mA |
| Tętnienia i szumy napięcia (RMS) | ≤ 15 mV |
| Interfejs sterowania zdalnego | Analogowy (0–5 V / 0–10 V), RS-232, opcjonalnie GPIB/IEEE-488 |
| Wymiary (szer. x wys. x gł.) | 483 mm x 222 mm (5U) x 711 mm |
Sorensen SGA10X1K2 Options:
- SGA10X1K2 - C - Input Voltage 187 / 242VAC, 3 Phase
- SGA10X1K2 - D - Input Voltage 342 / 440VAC, 3 Phase
- SGA10X1K2 - E - Input Voltage 396 / 528VAC, 3 Phase
- SGA10X1K2 - 0A - No Remote Control Option
- SGA10X1K2 - 1A - IEEE-488.2 + RS-232C
- SGA10X1K2 - 1C - Ethernet + RS-232C
- SGA10X1K2 - 1D - Isolated Analog Control
- SGA10X1K2 - 1E - Shaft Locks (SGA series only)
- SGA10X1K2 - 2A - Combined Options 1A+1D
- SGA10X1K2 - 2C - Combined Options 1A+1E (SGA Only)
- SGA10X1K2 - 2G - Combined Options 1C+1D
- SGA10X1K2 - 2H - Combined Options 1C+1E (SGA Only)
- SGA10X1K2 - 2J - Combined Options 1D+1E (SGA Only)
- SGA10X1K2 - 3C - Combined Options 1A+1D+1E (SGA Only)
- SGA10X1K2 - 3G - Combined Options 1C+1D+1E (SGA Only)
- SGA10X1K2 - AA - No Process Option
- SGA10X1K2 - AB - Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data)
- SGA10X1K2 - AJ - Front panel dust filter - factory installed - 3U unit only
- SGA10X1K2 - CV - 400Hz AC input @ 208 VAC (does not carry CE, CSA or UL marks) (6U only) STD on 3U
- SGA10X1K2 - PF - Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V)
- SGA10X1K2 - R - RoHS Compliant Version
| Model | SGA10X1K2 |
|---|
SORENSEN SGI10X1K2 DC Power Supply The Sorensen SGA10X1K2 Series represents the next generation of high power programmable DC power supplies. The SG Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20VDC output in a 3U package the SG leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units. At the heart of the SGA10X1K2 series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power. Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system cur.SGA: Outstanding Value - Analog Control: The SGA, with its industry leading performance, is available for customers requiring simple front panel analog controls or external control. With the same high performance power electronics as the SGI, the SGA provides essential features like 10- turn potentiometers for setting voltage and cur, 3 ½ digit LED readout plus front panel over-voltage protection (OVP) preview/adjustment and reset. Specifications for the SORENSEN SGI10X1K2 DC Power Supply Include:
