Sorensen
Sorensen SGA50-250
Power Supply, 50V, 250A, 12kW
50 V Napięcie wyjściowe
250 A Prąd wyjściowy
12 500 W Moc wyjściowa
208/240 V AC, trójfazowe Napięcie wejściowe
47–63 Hz Częstotliwość wejściowa
| Atrybut | Wartość |
|---|---|
| Napięcie wyjściowe | 50 V |
| Prąd wyjściowy | 250 A |
| Moc wyjściowa | 12 500 W |
| Napięcie wejściowe | 208/240 V AC, trójfazowe |
| Częstotliwość wejściowa | 47–63 Hz |
| Regulacja napięcia (obciążenie) | 0,05% |
| Regulacja prądu (obciążenie) | 0,1% |
| Tętnienia i szumy napięcia | 50 mV RMS / 200 mV p-p |
| Interfejs sterowania | Analogowy, RS-232, opcjonalnie GPIB/IEEE-488 |
| Wymiary (szer. x wys. x gł.) | 483 mm x 222 mm x 711 mm (3U, rack 19") |
Sorensen SGA50-250 Options:
- SGA50-250 - C - Input Voltage 187 / 242VAC, 3 Phase
- SGA50-250 - D - Input Voltage 342 / 440VAC, 3 Phase
- SGA50-250 - E - Input Voltage 396 / 528VAC, 3 Phase
- SGA50-250 - 0A - No Remote Control Option
- SGA50-250 - 1A - IEEE-488.2 + RS-232C
- SGA50-250 - 1C - Ethernet + RS-232C
- SGA50-250 - 1D - Isolated Analog Control
- SGA50-250 - 1E - Shaft Locks (SGA series only)
- SGA50-250 - 2A - Combined Options 1A+1D
- SGA50-250 - 2C - Combined Options 1A+1E (SGA Only)
- SGA50-250 - 2G - Combined Options 1C+1D
- SGA50-250 - 2H - Combined Options 1C+1E (SGA Only)
- SGA50-250 - 2J - Combined Options 1D+1E (SGA Only)
- SGA50-250 - 3C - Combined Options 1A+1D+1E (SGA Only)
- SGA50-250 - 3G - Combined Options 1C+1D+1E (SGA Only)
- SGA50-250 - AA - No Process Option
- SGA50-250 - AB - Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data)
- SGA50-250 - AJ - Front panel dust filter - factory installed - 3U unit only
- SGA50-250 - CV - 400Hz AC input @ 208 VAC (does not carry CE, CSA or UL marks) (6U only) STD on 3U
- SGA50-250 - PF - Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V)
- SGA50-250 - R - RoHS Compliant Version
| Model | SGA50-250 |
|---|
SORENSEN SGA50-250 DC Power Supply The Sorensen SGA50-250 represents the next generation of high power programmable DC power supplies. It is designed for exceptional load transient response, low noise and the highest power density in the industry. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units. At the heart of the SG series is a 5 kW power module. Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system cur.SGA: Outstanding Value - Analog Control (Sorensen General purpose Analog) The Sorensen SGA50-250, with its industry leading performance, is available for customers requiring simple front panel analog controls or external control. With the same high performance power electronics as the SGI, the SGA provides essential features like 10- turn potentiometers for setting voltage and cur, 3 ½ digit LED readout plus front panel over-voltage protection (OVP) preview/adjustment and reset. Specifications for the SORENSEN SGA50-250 DC Power Supply Include:
