EN
DE
IT
ES
FR
Tektronix TCP312A
| Producent | Tektronix |
| Model | TCP312A |
| Produkt | Probe, AC/DC current, DC to 100 MHz 30 A DC |
| Type | Used |
SKU
143591
Tektronix TCP312A PROBEThe Tektronix TCP312A Cur Probe is a split-core probe that uses both transformer and Hall effect technology. When connected to Tektronix Oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC), or TekVPI (w/ TPA-BNC) interfaces, the Tektronix TCP312A probe makes cur measurements and calculations simple and easy.Features and Specifications of the TCP31A Cur Probe include: Features: Specifications of the TCP312A Probe w/ TCPA300 Amplifier: AC/DC measurement capabilities Automatic Scaling and Units - Oscilloscope on-screen readout of magnitude and amps reduces measurement errors with no more hand calculations AC/DC input coupling Low insertion impedance reduces DUT loading Split-core design allows easy circuit connection Status indicators provide visual operating status and notification of potential error conditions including: Low DC drift and noise allows improved low-level cur measurements Applications: Degauss, probe open, overload, not terminated into 50 Ω, noncompatible probe type Development and analysis solutions for designers, installers, and service personnel in telecomm, data comm, computer, and semiconductor power electronics environments for: Power supplies (switching and linear) Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs) Power inverters/converters Electronic ballasts Industrial/consumer electronics Mobile communications (phone, satellite, relay stations) Motor drives Transportation systems (electronic vehicles, electronic trains, locomotives, avionics) Bandwidth: DC - 100 MHz Rise Time: ≤3.5 ns DC Accuracy: ±3% of reading DC Accuracy, typical: ±1% of reading Lowest measureable cur (at ±3% accuracy at DC) and Scope set to 1 mV/div and 20 MHz BW limited: 1 mA Maximum Amp-Second product, typical (Based on amplifier range setting: Maximum wire voltage, bare insulated: AC-coupling low-frequency and Bandwidth, typical (Low pass - 3 dB point: Displayed RMS noise, typical (at 20 MHz bandwith limit): ≤250 μARMS Signal delay (to output BNC): 17 ns Insertion Impedance: Maximum cur ratings: 50 AμS - 1 A/V 500 AμS - 10 A/V 150 V CAT ll 300 V CAT ll 0.11 Ω at 1 MHz 0.12 Ω at 10 MHz 0.35 Ω at 50 MHz 0.7 Ω at 100 MHz High-cur sensitivity: Low-cur sensitivity: Range: 10 A/V DC (continuous): 30 A RMS (sinusoidal): 21.2 A Peak: 50 A Range: 1 A/V DC (continuous): 5 A RMS (sinusoidal): 3.5 A Peak: 50 A
- AC/DC measurement capabilities
- Automatic Scaling and Units - Oscilloscope on-screen readout of magnitude and amps reduces measurement errors with no more hand calculations
- AC/DC input coupling
- Low insertion impedance reduces DUT loading
- Split-core design allows easy circuit connection
- Status indicators provide visual operating status and notification of potential error conditions including:
- Degauss, probe open, overload, not terminated into 50 Ω, noncompatible probe type
- Low DC drift and noise allows improved low-level cur measurements
- Applications:
- Development and analysis solutions for designers, installers, and service personnel in telecomm, data comm, computer, and semiconductor power electronics environments for:
- Power supplies (switching and linear)
- Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications (phone, satellite, relay stations)
- Motor drives
- Transportation systems (electronic vehicles, electronic trains, locomotives, avionics)
- Bandwidth: DC - 100 MHz
- Rise Time: ≤3.5 ns
- DC Accuracy: ±3% of reading
- DC Accuracy, typical: ±1% of reading
- Lowest measureable cur (at ±3% accuracy at DC) and Scope set to 1 mV/div and 20 MHz BW limited: 1 mA
- Maximum Amp-Second product, typical (Based on amplifier range setting:
- 50 AμS - 1 A/V
- 500 AμS - 10 A/V
- Maximum wire voltage, bare insulated:
- 150 V CAT ll
- 300 V CAT ll
- AC-coupling low-frequency and Bandwidth, typical (Low pass - 3 dB point:
- Displayed RMS noise, typical (at 20 MHz bandwith limit): ≤250 μARMS
- Signal delay (to output BNC): 17 ns
- Insertion Impedance:
-
- 0.11 Ω at 1 MHz
- 0.12 Ω at 10 MHz
- 0.35 Ω at 50 MHz
- 0.7 Ω at 100 MHz
- Maximum cur ratings:
- High-cur sensitivity:
- Range: 10 A/V
- DC (continuous): 30 A
- RMS (sinusoidal): 21.2 A
- Peak: 50 A
- Low-cur sensitivity:
- Range: 1 A/V
- DC (continuous): 5 A
- RMS (sinusoidal): 3.5 A
- Peak: 50 A
- High-cur sensitivity:
- Degauss, probe open, overload, not terminated into 50 Ω, noncompatible probe type
- Development and analysis solutions for designers, installers, and service personnel in telecomm, data comm, computer, and semiconductor power electronics environments for:
- Power supplies (switching and linear)
- Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications (phone, satellite, relay stations)
- Motor drives
- Transportation systems (electronic vehicles, electronic trains, locomotives, avionics)
- Power supplies (switching and linear)
- Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications (phone, satellite, relay stations)
- Motor drives
- Transportation systems (electronic vehicles, electronic trains, locomotives, avionics)
- 50 AμS - 1 A/V
- 500 AμS - 10 A/V
- 150 V CAT ll
- 300 V CAT ll
- 0.11 Ω at 1 MHz
- 0.12 Ω at 10 MHz
- 0.35 Ω at 50 MHz
- 0.7 Ω at 100 MHz
- High-cur sensitivity:
- Range: 10 A/V
- DC (continuous): 30 A
- RMS (sinusoidal): 21.2 A
- Peak: 50 A
- Low-cur sensitivity:
- Range: 1 A/V
- DC (continuous): 5 A
- RMS (sinusoidal): 3.5 A
- Peak: 50 A
- Range: 10 A/V
- DC (continuous): 30 A
- RMS (sinusoidal): 21.2 A
- Peak: 50 A
- Range: 1 A/V
- DC (continuous): 5 A
- RMS (sinusoidal): 3.5 A
- Peak: 50 A
Zwroty
Jeśli nie jesteś całkowicie zadowolony z zakupu, po prostu zwróć produkt w oryginalnym stanie w ciągu 30 dni od daty otrzymania. Zwracane przedmioty muszą być nieużywane i znajdować się w oryginalnym opakowaniu wraz z dołączoną dokumentacją. Po otrzymaniu dokonamy pełnego zwrotu kosztów, z wyłączeniem pierwotnych kosztów dostawy. Alternatywnie możemy wymienić produkt, jeśli wolisz.
VAT
Ceny nie zawierają VAT. Transakcje wewnątrzwspólnotowe: Zgodnie z dyrektywą UE w sprawie VAT, sprzedaż towarów B2B pomiędzy krajami UE jest opodatkowana stawką 0%. W przypadku naliczania VAT, stosowana jest stawka 23%. Poza UE VAT nie jest naliczany.
