Rohde & Schwarz FPC1000 Spectrum Analyser
| Attribute | Value |
|---|---|
| Frequency Range | 5 kHz to 1 GHz |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz |
| Display Average Noise Level (DANL) | -150 dBm (typ.) at 1 GHz |
| Phase Noise | -98 dBc/Hz at 10 kHz offset (typ.) |
| Input Impedance | 50 Ohm |
| Maximum Input Power | +20 dBm (continuous) |
| Dynamic Range | Up to 95 dB |
| Display | 10.1-inch WXGA capacitive touchscreen (1366 x 768 pixels) |
| Connectivity | USB, LAN (Ethernet), WiFi (optional) |
| Power Supply | AC 100 V to 240 V, 50 Hz to 60 Hz; DC 12 V via optional battery pack |
Rohde & Schwarz FPC1000 Spectrum Analyser Options:
- FSL - B4 - OCXO Reference Frequency
- FSL - B5 - Additional Interfaces (video out, IF out, noise source control, AUX port, R&S NRP-Zxx power sensor)
- FSL - B6 - TV Trigger
- FSL - B7 - Narrow Resolution Filters
- FSL - B8 - Gated Sweep
- FSL - B10 - GPIB Interface
- FSL - B22 - RF Preamplifier (3/6 GHz)
- FSL - B30 - DC Power Supply
- FSL - B31 - NiMH Battery Pack 4.5 Ah
- ETL - B235 - Li-Ion Battery Pack 10 Ah with Battery Charger
- FSL - K7 - AM/FM/φM Measurement Demodulator
- FSL - K8 - Bluetooth TX Measurements (1.1 and 2.0 + EDR)
- FSL - K9 - Power Sensor Support
- FSL - K14 - Spectrogram Measurements
- FSL - K20 - Cable TV and TV Measurements
- FSL - K30 - Application Firmware for Noise Figure and Gain Measurements
- FSL - K72 - 3GPP FDD BTS Application Firmware
- FSL - K82 - CDMA2000 Base Station Analysis
- FSL - K84 - 1xEV-DO Base Station Measurement
- FSL - K91 - WLAN IEEE 802.11a/b/g/j Application Firmware
- FSL - K91n - Upgrade of R&S FSL-K91 to IEEE 802.11n
- FSL - K92 - WiMAX IEEE 802.16 OFDM Application Firmware
- FSL - K93 - WiMAX IEEE 802.16 OFDM/OFDMA Application Firmware
- FSL - K92U - Upgrade from R&S FSL-K92 to R&S FSL-K93
| Model | FPC1000 |
|---|
The Rohde & Schwarz FPC-P1 (FPC1000 1GHz) spectrum analyser offers a frequency range of 5kHz to 1GHz with a resolution bandwidth down to 1Hz, ensuring high spectral detail. It features a WXGA 10.1" display, two USB ports, Ethernet/Wi-Fi connectivity, and a dynamic range supported by a low noise floor and high input power up to +30dBm.
Ideal for education, service, production, and basic research, it enables wireless remote operation through R&S MobileView or InstrumentView and includes vivid marker display and quick-access soft menu tools.
Testwall can supply the used Rohde & Schwarz FPC1000 Spectrum Analyser, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz FPC1000 Spectrum Analyser.
