Rohde & Schwarz FSQ26
| Attribute | Value |
|---|---|
| Frequency Range | 20 Hz – 26.5 GHz |
| Resolution Bandwidth | 1 Hz – 50 MHz |
| Phase Noise | < -130 dBc/Hz at 10 kHz offset (1 GHz carrier) |
| Displayed Average Noise Level (DANL) | -155 dBm (typ.) at 1 GHz with preamplifier enabled |
| Dynamic Range | > 110 dB |
| Input Impedance | 50 Ohm |
| Maximum Input Power (RF) | +30 dBm (1 W) |
| Amplitude Measurement Range | -130 dBm to +30 dBm |
| IF Analysis Bandwidth | Up to 120 MHz (with option R&S FSQ-B72) |
| Spurious-Free Dynamic Range (SFDR) | > 70 dBc (typ.) at 1 GHz |
Rohde & Schwarz FSQ26 Options:
- FSQ26 - FSU-B4 - Low-Aging OXCO
- FSQ26 - FSU-B9 - Tracking Generator, 100 kHz to 3.6 GHz
- FSQ26 - FSP-B10 - External Generator Control
- FSQ26 - FSU-B12 - Attenuator for Tracking Generator R&S FSU-B9
- FSQ26 - FSQ-B18 - Removable Hard Disk
- FSQ26 - FSQ-B19 - Second Hard Disk for R&S FSQ-B18
- FSQ26 - FSU-B21 - LO/IF Ports for External Mixers
- FSQ26 - FSQ-B23 - RF Preamplifier, 3.6 GHz to 26 GHz, for R&S FSQ 26
- FSQ26 - FSU-B25 - Electronic Attenuator, 0 dB to 30 dB, and 20 dB preamplifier
- FSQ26 - FSQ-B71 - Analog Baseband Inputs
- FSQ26 - FSQ-B72 - I/Q Bandwidth Extension to 60 MHz/120 MHz
- FSQ26 - FS-K5 - Modulation and spectrum measurements on GSM/EDGE base station and mobile signals
- FSQ26 - FS-K8 - Bluetooth transmitter measurements
- FSQ26 - FS-K9 - Power sensor measurements (supports R&S NRP-Z11/-Z21 with R&S NRP-Z4 USB adapter)
- FSQ26 - FS-K30 - Noise figure measurements (application firmware), remote-controllable
- FSQ26 - FS-K72 - Modulation and code domain power measurements to 3GPP TS 24.141 on base station signals (node B)
- FSQ26 - FS-K73 - Modulation and code domain power measurements to 3GPP TS 25.121 on mobile station signals (UE)
- FSQ26 - FS-K74 - HSDPA extension for R&S FS-K72
- FSQ26 - FS-K76 - Modulation and code domain power measurements on TD-SCDMA base station signals
- FSQ26 - FS-K77 - Modulation and code domain power measurements on TD-SCDMA mobile station signals (UE)
- FSQ26 - FS-K82 - Modulation and code domain power measurements to cdma2000/3GPP2 on base station signals (also for IS-95/cdmaOne signals)
- FSQ26 - FS-K83 - Modulation and code domain power measurements on cdma2000/1xEV-DV mobile station signals (UE)
- FSQ26 - FS-K84 - Modulation and code domain power measurements on cdma2000/1xEV-DO mobile station signals (UE)
- FSQ26 - FS-K85 - Modulation and code domain power measurements to 1xEV-DO on base station signals
- FSQ26 - FS-K4 - Phase noise measurements (Windows software)
- FSQ26 - FS-K7 - AM/FM/φM measurement demodulator with measurement of modulation frequency, THD, SINAD and spectrum (FFT) of the demodulated signal
- FSQ26 - FSQ-K70 - Universal vector signal analysis, FSK, MSK, BPSK, up to 256QAM, symbol rates up to 25 Msymbol/s (up to 81.6 Msymbol/s with R&S FSQ-B72)
- FSQ26 - FSQ-K91 - Modulation and spectrum measurements on WLAN signals to 802.11 a/b/g/j
| Model | FSQ26 |
|---|
The Rohde & Schwarz FSQ26 Signal Analyzer offers exceptional performance with a frequency range from 20 Hz to 26.5 GHz and a demodulation bandwidth of up to 120 MHz. It features a high dynamic range, 1 dB compression at +13 dBm, and an 84 dB ACLR with noise correction. This analyzer includes a 16 Msample IQ memory extendable to 705 Msample and supports technologies like GSM, LTE, CDMA2000, and WiMAX.
Ideal for signal analysis and digital demodulation, the FSQ26 delivers sweep speeds of 2.5 ms in the frequency domain and 1 µs in the time domain. It supports up to 80 manual measurements per second.
Testwall can supply the used Rohde & Schwarz FSQ26, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz FSQ26.
