Rohde & Schwarz RTO1002 Digital Oscilloscope
| Attribute | Value |
|---|---|
| Bandwidth | 1 GHz |
| Number of Channels | 2 |
| Sample Rate | 5 Gsample/s (single channel), 2.5 Gsample/s (dual channel) |
| Memory Depth | 20 Msample (standard), up to 200 Msample (optional) |
| Vertical Resolution | 8-bit ADC (up to 16-bit with high-resolution mode) |
| Rise Time | 400 ps |
| Input Impedance | 50 Ω / 1 MΩ selectable |
| Display | 10.4-inch XGA TFT touchscreen, 1024 x 768 resolution |
| Waveform Update Rate | Up to 1,000,000 waveforms/second |
| Connectivity & Interfaces | USB, LAN (LXI), GPIB (optional), VGA output |
Rohde & Schwarz RTO1002 Digital Oscilloscope Options:
- RTO1002 - B1 - Mixed Signal Option, 400 MHz (additional 16 logic channels)
- RTO1002 - B4 - OCXO 10 MHz precision reference frequency with reference input and output connectors
- RTO1002 - B10 - Additional GPIB Interface
- RTO1002 - B18 - Solid State Disk (specify Windows XP embedded or Windows 7 embedded)
- RTO1002 - B19 - Additional Removable Hard Disk
- RTO1002 - B101 - Memory Upgrade, 50 Msample per channel
- RTO1002 - B102 - Memory Upgrade, 100 Msample per channel
- RTO1002 - B103 - Memory Upgrade, 200 Msample per channel (Windows 7 embedded required)
- RTO1002 - B104 - Memory Upgrade, 400 Msample per channel (Windows 7 embedded required)
- RTO1002 - B200 - Bandwidth Upgrade to 1 GHz, incl. calibration
- RTO1002 - B201 - Bandwidth Upgrade to 2 GHz, incl. calibration
- RTO1002 - U1 - Upgrade of operating system from Windows XP embedded to Windows 7 embedded
- RTO1002 - K1 - I²C/SPI Serial Decoding
- RTO1002 - K2 - UART/RS-232/RS-422/RS-485 Serial Decoding
- RTO1002 - K3 - CAN/LIN Serial Triggering and Decoding
- RTO1002 - K4 - FlexRay™ Serial Triggering and Decoding
- RTO1002 - K5 - I²S Serial Triggering and Decoding
- RTO1002 - K6 - MIL-STD-1553 Serial Triggering and Decoding
- RTO1002 - K7 - ARINC 429 Serial Triggering and Decoding
- RTO1002 - K8 - Ethernet Serial Decoding
- RTO1002 - K9 - CAN FD Serial Triggering and Decoding
- RTO1002 - K11 - I/Q Software Interface
- RTO1002 - K12 - Basic Jitter Analysis
- RTO1002 - K13 - Realtime Clock Data Recovery (CDR)
- RTO1002 - K17 - High Definition Mode
- RTO1002 - K21 - USB 2.0 Compliance Test
- RTO1002 - K22 - Ethernet Compliance Test (10BaseT, 100BaseTx, 1000BaseT)
- RTO1002 - K23 - Ethernet 10G Compliance Test
- RTO1002 - K24 - BroadR-Reach Compliance Test
- RTO1002 - K26 - D-PHY Compliance Test
- RTO1002 - K31 - Power Analysis
- RTO1002 - K40 - MIPI RFFE Serial Triggering and Decoding
- RTO1002 - K55 - MDIO Serial Triggering and Decoding
- RTO1002 - K60 - USB 1.0/1.1/2.0/HSIC Serial Triggering and Decoding
| Model | RTO1002 |
|---|
The Rohde & Schwarz RTO1002 is a powerful 2-channel digital oscilloscope with 600 MHz bandwidth and real-time sampling up to 10 GSa/s per channel. It offers ultra-fast waveform update rates exceeding 1 million waveforms/sec and deep memory capacity up to 100 M samples/channel.
Designed for debugging, design validation, and waveform analysis, it features advanced trigger modes, segmented memory, protocol decoding, and a high-resolution 12.1" touchscreen interface.
Testwall can supply the used Rohde & Schwarz RTO1002 Digital Oscilloscope, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz RTO1002 Digital Oscilloscope.
