Sorensen
Sorensen DHP 3
0-66 30.0V Power Supply
3 kW Output Power
0 – 600 VDC Output Voltage Range
0 – 5 A Output Current Range
208/240 VAC, Single Phase Input Voltage
0.01% + 2 mV Line Regulation (Voltage)
| Attribute | Value |
|---|---|
| Output Power | 3 kW |
| Output Voltage Range | 0 – 600 VDC |
| Output Current Range | 0 – 5 A |
| Input Voltage | 208/240 VAC, Single Phase |
| Line Regulation (Voltage) | 0.01% + 2 mV |
| Load Regulation (Voltage) | 0.01% + 2 mV |
| Ripple and Noise (Voltage, rms) | 0.5 mV rms typical |
| Programming Interface | Analog (0–5 V or 0–10 V), RS-232/GPIB optional |
| Operating Temperature | 0 °C to 50 °C |
| Form Factor / Mounting | Rack Mount, 3U |
Sorensen DHP 3 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
