Sorensen
Sorensen DHP
5-325 5.0V Power Supply
0 to 600 VDC Output Voltage Range
Up to 30 kW Output Power
Up to 500 A Output Current
208/240/400/480 VAC, 3-Phase Input Voltage
0.05% of full scale output Regulation (Load)
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 to 600 VDC |
| Output Power | Up to 30 kW |
| Output Current | Up to 500 A |
| Input Voltage | 208/240/400/480 VAC, 3-Phase |
| Regulation (Load) | 0.05% of full scale output |
| Regulation (Line) | 0.05% of full scale output |
| Ripple and Noise | 0.1% RMS / 0.5% peak-to-peak of full scale output |
| Programming Interface | Analog, RS-232, GPIB, Ethernet (optional) |
| Cooling Method | Forced air cooling |
| Operating Temperature | 0°C to 50°C |
Sorensen DHP Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
