Sorensen
Sorensen DLM 1
0-60 10.0V Power Supply
0 - 8 V Output Voltage Range
0 - 50 A Output Current Range
400 W Output Power
100 - 240 VAC, 50/60 Hz Input Voltage
0.01% + 2 mV Line Regulation (Voltage)
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 - 8 V |
| Output Current Range | 0 - 50 A |
| Output Power | 400 W |
| Input Voltage | 100 - 240 VAC, 50/60 Hz |
| Line Regulation (Voltage) | 0.01% + 2 mV |
| Load Regulation (Voltage) | 0.01% + 2 mV |
| Ripple and Noise (Voltage, rms) | 1 mV rms |
| Programming Accuracy (Voltage) | 0.05% + 10 mV |
| Operating Temperature | 0°C to 50°C |
| Interface/Control | Analog programming, RS-232, GPIB (optional) |
Sorensen DLM 1 Options:
- DLM - M130 - Ethernet/LAN Option (16 bit): LXI Class C Compliant, 10/100 base-T, TCP/IP Protocol, ICMP (Ping Server), Web Server: Direct control of power supply via standard web browser, RS-232C Interface
- DLM - M6 - Disconnect & Polarity reversal relays (10V to 300V models only). Requires one of the following options: M9G, M85, M130 or M131. Output disconnect and polarity reversal relays controlled via SCPI commands. An SPST relay is in line with each output lead.
- DLM - M9G - IEEE-488.2 and RS-232C Interfaces
- DLM - M13 - Locking shafts (front panel potentiometers)
- DLM - M51A - Optically Isolated Analog Programming and Monitoring
- DLM - M85 - Multichannel Slave Interface
- DLM - M131 - Multichannel Slave Interface (16 bit) (M130 Master ONLY)
- DLM - DLMP1 - Paralleling Cable; one cable per slave unit
- DLM - DLMRK - Rackmount Kit for single DLM with filler panel and for two units mounted side-by-side
| Model | DLM |
|---|
