Sorensen
Sorensen DLM 2
0-30 20.0V Power Supply
0 – 60 V DC Output Voltage Range
0 – 33.3 A Output Current Range
2000 W (2 kW) Output Power
0.01% + 2 mV Line Regulation (Voltage)
0.01% + 2 mV Load Regulation (Voltage)
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 – 60 V DC |
| Output Current Range | 0 – 33.3 A |
| Output Power | 2000 W (2 kW) |
| Line Regulation (Voltage) | 0.01% + 2 mV |
| Load Regulation (Voltage) | 0.01% + 2 mV |
| Ripple and Noise (RMS) | 1 mV RMS typical |
| Programming Interface | Analog, RS-232, GPIB (optional), Ethernet (optional) |
| Operating Temperature Range | 0°C to 50°C |
| Input Voltage | 208/240 V AC, Single Phase, 47–63 Hz |
| Cooling Method | Forced Air Cooling |
Sorensen DLM 2 Options:
- DLM - M130 - Ethernet/LAN Option (16 bit): LXI Class C Compliant, 10/100 base-T, TCP/IP Protocol, ICMP (Ping Server), Web Server: Direct control of power supply via standard web browser, RS-232C Interface
- DLM - M6 - Disconnect & Polarity reversal relays (10V to 300V models only). Requires one of the following options: M9G, M85, M130 or M131. Output disconnect and polarity reversal relays controlled via SCPI commands. An SPST relay is in line with each output lead.
- DLM - M9G - IEEE-488.2 and RS-232C Interfaces
- DLM - M13 - Locking shafts (front panel potentiometers)
- DLM - M51A - Optically Isolated Analog Programming and Monitoring
- DLM - M85 - Multichannel Slave Interface
- DLM - M131 - Multichannel Slave Interface (16 bit) (M130 Master ONLY)
- DLM - DLMP1 - Paralleling Cable; one cable per slave unit
- DLM - DLMRK - Rackmount Kit for single DLM with filler panel and for two units mounted side-by-side
| Model | DLM |
|---|
