Sorensen
Sorensen DLM
5-75 5.0V Power Supply
0 - 600 VDC Output Voltage Range
0 - 50 A Output Current Range
Up to 3000 W Output Power
0.01% of full scale Line Regulation
0.01% of full scale Load Regulation
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 - 600 VDC |
| Output Current Range | 0 - 50 A |
| Output Power | Up to 3000 W |
| Line Regulation | 0.01% of full scale |
| Load Regulation | 0.01% of full scale |
| Ripple and Noise | 0.5 mV RMS typical |
| Programming Interface | Analog, RS-232, GPIB (optional) |
| Operating Temperature | 0°C to 50°C |
| Input Voltage | 105-132 VAC / 210-264 VAC, 47-63 Hz |
| Form Factor | Rack Mountable, 1U / 2U |
Sorensen DLM Options:
- DLM - M130 - Ethernet/LAN Option (16 bit): LXI Class C Compliant, 10/100 base-T, TCP/IP Protocol, ICMP (Ping Server), Web Server direct control via standard web browser, RS-232C Interface
- DLM - M6 - Disconnect & Polarity reversal relays (10V to 300V models only; requires M9G, M85, M130 or M131): Output disconnect and polarity reversal relays controlled via SCPI commands; SPST relay in line with each output lead
- DLM - M9G - IEEE-488.2 and RS-232C Interfaces
- DLM - M13 - Locking shafts (front panel potentiometers)
- DLM - M51A - Optically Isolated Analog Programming and Monitoring
- DLM - M85 - Multichannel Slave Interface
- DLM - M131 - Multichannel Slave Interface (16 bit) (M130 Master ONLY)
- DLM - DLMP1 - Paralleling Cable; one cable per slave unit
- DLM - DLMRK - Rackmount Kit for single DLM with filler panel and for two units mounted side-by-side
| Model | DLM |
|---|
