Sorensen
Sorensen SGA10X1K2
DC Power Supply, 10V, 1200A, 12kW
0 - 10 V Output Voltage
0 - 120 A Output Current
1200 W Output Power
105 - 132 VAC / 210 - 264 VAC, Single Phase Input Voltage
47 - 63 Hz Input Frequency
| Attribute | Value |
|---|---|
| Output Voltage | 0 - 10 V |
| Output Current | 0 - 120 A |
| Output Power | 1200 W |
| Input Voltage | 105 - 132 VAC / 210 - 264 VAC, Single Phase |
| Input Frequency | 47 - 63 Hz |
| Line Regulation | 0.01% of full scale output |
| Load Regulation | 0.01% of full scale output |
| Ripple and Noise (RMS) | 10 mV RMS / 50 mV peak-to-peak |
| Interface | Analog Programming, RS-232, GPIB (optional) |
| Operating Temperature | 0°C to 50°C |
Sorensen SGA10X1K2 Options:
- SGA10X1K2 - C - Input Voltage 187 / 242VAC, 3 Phase
- SGA10X1K2 - D - Input Voltage 342 / 440VAC, 3 Phase
- SGA10X1K2 - E - Input Voltage 396 / 528VAC, 3 Phase
- SGA10X1K2 - 0A - No Remote Control Option
- SGA10X1K2 - 1A - IEEE-488.2 + RS-232C
- SGA10X1K2 - 1C - Ethernet + RS-232C
- SGA10X1K2 - 1D - Isolated Analog Control
- SGA10X1K2 - 1E - Shaft Locks (SGA series only)
- SGA10X1K2 - 2A - Combined Options 1A+1D
- SGA10X1K2 - 2C - Combined Options 1A+1E (SGA Only)
- SGA10X1K2 - 2G - Combined Options 1C+1D
- SGA10X1K2 - 2H - Combined Options 1C+1E (SGA Only)
- SGA10X1K2 - 2J - Combined Options 1D+1E (SGA Only)
- SGA10X1K2 - 3C - Combined Options 1A+1D+1E (SGA Only)
- SGA10X1K2 - 3G - Combined Options 1C+1D+1E (SGA Only)
- SGA10X1K2 - AA - No Process Option
- SGA10X1K2 - AB - Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data)
- SGA10X1K2 - AJ - Front panel dust filter - factory installed - 3U unit only
- SGA10X1K2 - CV - 400Hz AC input @ 208 VAC (does not carry CE, CSA or UL marks) (6U only) STD on 3U
- SGA10X1K2 - PF - Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V)
- SGA10X1K2 - R - RoHS Compliant Version
| Model | SGA10X1K2 |
|---|
SORENSEN SGI10X1K2 DC Power Supply The Sorensen SGA10X1K2 Series represents the next generation of high power programmable DC power supplies. The SG Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20VDC output in a 3U package the SG leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units. At the heart of the SGA10X1K2 series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power. Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system cur.SGA: Outstanding Value - Analog Control: The SGA, with its industry leading performance, is available for customers requiring simple front panel analog controls or external control. With the same high performance power electronics as the SGI, the SGA provides essential features like 10- turn potentiometers for setting voltage and cur, 3 ½ digit LED readout plus front panel over-voltage protection (OVP) preview/adjustment and reset. Specifications for the SORENSEN SGI10X1K2 DC Power Supply Include:
