Tektronix P76CA-SMP
| Attribute | Value |
|---|---|
| Bandwidth | 7.5 GHz |
| Connector Type | SMP (Sub-Miniature Push-on) |
| Probe Type | Single-Ended Voltage Probe |
| Input Impedance | 50 Ω |
| Maximum Input Voltage | ±2.5 V |
| Dynamic Range | ±1 V |
| Rise Time | ≤ 46.7 ps |
| Cable Length | Approximately 1.2 m (4 ft) |
| Compatible Oscilloscopes | Tektronix MSO/DPO70000 Series, DSA/MSO/DPO72504DX, and other compatible Tektronix high-bandwidth oscilloscopes |
| Attenuation Ratio | 10X |
Tektronix P76CA-SMP Options:
- P76CA-SMP - Opt. C3 - Calibration Service 3 Years
- P76CA-SMP - Opt. C5 - Calibration Service 5 Years
- P76CA-SMP - Opt. D3 - Calibration Data Report 3 Years (with Opt. C3)
- P76CA-SMP - Opt. D5 - Calibration Data Report 5 Years (with Opt. C5)
- P76CA-SMP - Opt. G3 - Complete Care 3 Years (includes loaner, scheduled calibration, and more)
- P76CA-SMP - Opt. G5 - Complete Care 5 Years (includes loaner, scheduled calibration, and more)
- P76CA-SMP - Opt. R3 - Repair Service 3 Years (including warranty)
- P76CA-SMP - Opt. R3DW - Repair Service Coverage 3 Years (includes product warranty period). 3-year period starts at time of instrument purchase
- P76CA-SMP - Opt. R5 - Repair Service 5 Years (including warranty)
- P76CA-SMP - Opt. R5DW - Repair Service Coverage 5 Years (includes product warranty period). 5-year period starts at time of instrument purchase
- P76CA-SMP - P76CA-292 - 2.92 mm Coaxial Adapter
- P76CA-SMP - P76CA-292C - 2.92 mm Coaxial Adapter with Cables
- P76CA-SMP - P76CA-BTI292 - Coaxial Adapter - P7600 tip interface to 2.92 mm connector
- P76CA-SMP - P76TA - P7500 Tip Adapter
- P76CA-SMP - P76PST - P7500 TriMode Performance Solder Tip
- P76CA-SMP - P75TLRST - P7500 TriMode Long Reach Solder Tip
- P76CA-SMP - 020-2936-xx - P7500 TriMode Resistor Solder Tip
- P76CA-SMP - 020-2944-xx - P7500 TriMode Extended Resistor Solder Tip
- P76CA-SMP - 020-3118-xx - Solder Tip Ramps, Kit of 25
- P76CA-SMP - 006-8237-xx - Adhesive Tip Tape, Strip of 10
- P76CA-SMP - 067-2431-xx - Deskew Fixture
- P76CA-SMP - 003-1934-xx - SMPM Bullet Removal Tool
- P76CA-SMP - 020-3105-xx - SMPM Replacement Bullet Contacts (package of 4)
- P76CA-SMP - 003-1896-xx - G3PO Bullet Removal Tool
- P76CA-SMP - 013-0359-xx - G3PO Replacement Bullet Contacts (package of 4)
- P76CA-SMP - 020-2754-xx - Wire Kit (package of 3 bobbins)
- P76CA-SMP - 020-2937-xx - Replacement Resistor Kit
| Model | P76CA-SMP |
|---|
The Tektronix P76CA-SMP TriMode adapter provides 33 GHz bandwidth and ultra-low system noise for high-sensitivity signal testing with MSO/DPO70000DX and DPO/DSA70000D Series oscilloscopes. It supports differential, single-ended, and common-mode measurements through a remote head design and TekConnect® interface, enhancing probing efficiency and accuracy.
Compatible with SMP and 2.92 mm coaxial adapters, and P7500 Series solder-in tips, the adapter ensures signal fidelity using probe-specific S-parameters and auto DSP correction filters for standards like HDMI, PCIe, and MIPI M-PHY.
Testwall can supply the used Tektronix P76CA-SMP, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Tektronix P76CA-SMP.
