DE
IT
ES
FR
PL
Amplifier Research 15S1G6
| Manufacturer | Amplifier Research |
| Model | 15S1G6 |
| Product | RF Amplifier 1 GHz - 6 GHz 15W |
| Type | Used |
SKU
119070
Amplifier Research 15S1G6 The Amplifier Research 15S1G6 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications that require instantaneous bandwidth and high gain. It is housed in a stylish cabinet and designed for benchtop use, but can be removed for equipment rack mounting.Features and Specifications of the Amplifier Research 15S1G6 Amplifier include: Features: Specifications: Provides a minimum of 15 watts of RF power when used with a sweep generator Front panel gain control provides convenience of setting desired output level RF input leveling circuit: RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs Digital control for both local and remote control of amplifier Control functions and status indications are available remotely in GPIB/IEEE format, RS-232 hardwire and fiber optic, USB and Ethernet Bus interface connector on back panel Local/Remote switch on front panel assures positive control of local or remote operation Protects the amplifier from RF input overdrive Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm Rated output power: 15 watts minimum Power output @ 3dB compression: Power output @ 1dB compression: Small Signal Gain Flatness: Frequency response: 1 – 6 GHz instantaneously Input for rated output: 1.0 milliwatt maximum Gain (at maximum setting): 43 dB minimum Gain adjustment (continuous range): 10 dB minimum (4096 steps remote) Input impedance: 50 ohms, VSWR 2.0:1 maximum Output impedance: 50 ohms nominal Mismatch tolerance: Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal Harmonic distortion: Minus 20 dBc maximum at 15 watts Spurious: Minus 73 dBc typical Third order intercept point: 48 dBm typical Noise figure: 10 dB typical Primary power (selected automatically): Connectors: Safety Interlock: 15 pin Subminiature D Cooling: Forced air (self contained fans) Nominal: 20 watts Minimum: 15 watts Nominal: 15 watts Minimum: 12 watts typical: ±1.5 dB maximum: ±2.0 dB 100% of rated power without foldback Will operate without damage or oscillation with any magnitude and phase of source and load impedance 90-132, 180-264VAC 50/60 Hz, single phase 210 watts maximum RF: Type N female Remote Interfaces: IEEE-488: 24 pin female RS-232: 9 pin Subminiature D (female) RS-232 (fiber-optic): Type ST USB 2.0: Type B Ethernet: RJ-45
- Provides a minimum of 15 watts of RF power when used with a sweep generator
- Front panel gain control provides convenience of setting desired output level
- RF input leveling circuit:
- Protects the amplifier from RF input overdrive
- Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm
- RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them
- Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs
- Digital control for both local and remote control of amplifier
- Control functions and status indications are available remotely in GPIB/IEEE format, RS-232 hardwire and fiber optic, USB and Ethernet
- Bus interface connector on back panel
- Local/Remote switch on front panel assures positive control of local or remote operation
- Rated output power: 15 watts minimum
- Power output @ 3dB compression:
- Nominal: 20 watts
- Minimum: 15 watts
- Power output @ 1dB compression:
- Nominal: 15 watts
- Minimum: 12 watts
- Small Signal Gain Flatness:
- typical: ±1.5 dB
- maximum: ±2.0 dB
- Frequency response: 1 – 6 GHz instantaneously
- Input for rated output: 1.0 milliwatt maximum
- Gain (at maximum setting): 43 dB minimum
- Gain adjustment (continuous range): 10 dB minimum (4096 steps remote)
- Input impedance: 50 ohms, VSWR 2.0:1 maximum
- Output impedance: 50 ohms nominal
- Mismatch tolerance:
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- Harmonic distortion: Minus 20 dBc maximum at 15 watts
- Spurious: Minus 73 dBc typical
- Third order intercept point: 48 dBm typical
- Noise figure: 10 dB typical
- Primary power (selected automatically):
- 90-132, 180-264VAC
- 50/60 Hz, single phase
- 210 watts maximum
- Connectors:
- RF: Type N female
- Remote Interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Safety Interlock: 15 pin Subminiature D
- Cooling: Forced air (self contained fans)
- Protects the amplifier from RF input overdrive
- Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm
- Nominal: 20 watts
- Minimum: 15 watts
- Nominal: 15 watts
- Minimum: 12 watts
- typical: ±1.5 dB
- maximum: ±2.0 dB
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- 90-132, 180-264VAC
- 50/60 Hz, single phase
- 210 watts maximum
- RF: Type N female
- Remote Interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
Returns
If you are not completely satisfied with your purchase, simply return the item to us in its original condition within 30 days of receipt.
Returned items should be unused and must be returned in original packaging with any enclosed documentation. We will issue a full refund on receipt, excluding the original delivery charge. Alternatively, if preferred, we will exchange the item.
VAT
Prices exclude VAT. Intra-Community transactions: Under the EU VAT Directive, B2B sales of goods across EU VAT borders is VAT zero-rated.
Where VAT is charged, a rate of 23% is applied.
VAT is not charged outside of the EU.
