Anritsu 68147B
| Attribute | Value |
|---|---|
| Frequency Range | 10 MHz to 20 GHz |
| Output Power Range | -20 dBm to +13 dBm |
| Frequency Resolution | 1 Hz |
| Phase Noise | -80 dBc/Hz at 10 kHz offset (typical) |
| Switching Speed | Less than 10 ms (typical) |
| Harmonic Suppression | -30 dBc (typical) |
| Output Connector | Type-N Female (50 Ohm) |
| Modulation Capabilities | AM, FM, Phase, and Pulse Modulation |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 0°C to 55°C |
Anritsu 68147B Options:
- 68147B - Option 1 - Rack mounting kit, includes one set of track slides (90° tilt capability), mounting ears, and front panel handles for mounting in a standard 19-inch equipment rack
- 68147B - Option 2A - Step attenuator (10 dB/step, high-end frequency of ≤26.5 GHz, rated output power is reduced)
- 68147B - Option 2B - Step attenuator (10 dB/step, high-end frequency of ≤40 GHz, rated output power is reduced)
- 68147B - Option 2C - Step attenuator (10 dB/step, high-end frequency of ≤50 GHz, rated output power is reduced)
- 68147B - Option 2D - Step attenuator (10 dB/step, high-end frequency of ≤60 GHz, rated output power is reduced)
- 68147B - Option 9 - Rear panel RF output (moves RF output connector to the rear panel)
- 68147B - Option 11 - 0.1 Hz frequency resolution (provides frequency resolution of 0.1 Hz)
- 68147B - Option 14 - Wiltron 360B VNA compatibility (modifies rack mounting hardware to mate unit in Wiltron 360B VNA console)
- 68147B - Option 15 - High power output (provides high-power from 2 to 26.5 GHz)
- 68147B - Option 16 - High stability time base (adds an ovenized, 10 MHz crystal oscillator as a high-stability time base)
- 68147B - Option 17 - Delete front panel (deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed)
- 68147B - Option 19 - SCPI programmability adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.2–1987
| Model | 68147B |
|---|
The Anritsu 68147B Synthesized Sweep Generator is a microprocessor-based signal source offering synthesized, high-resolution phase-lock capability. It provides both broad (0.01 – 20.0 GHz) and narrowband sweeps, along with stable CW frequencies. With an output power of up to +13.0 dBm, it ensures accurate and reliable test performance across demanding applications.
This generator allows full control from the front panel or remotely via IEEE-488 (GPIB), making it ideal for automated test systems and advanced RF measurements in research and production.
Testwall can supply the used Anritsu 68147B Synthesized Sweep Generator, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Anritsu 68147B Synthesized Sweep Generator.
