Anritsu 68169B
| Attribute | Value |
|---|---|
| Frequency Range | 10 MHz to 20 GHz |
| Output Power Range | -20 dBm to +17 dBm |
| Frequency Resolution | 1 Hz |
| Phase Noise | -116 dBc/Hz at 10 kHz offset (typical) |
| Spectral Purity (Harmonics) | -30 dBc or better |
| Frequency Switching Speed | Less than 10 ms (typical) |
| Output Connector | Type-N (Female) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Operating Temperature | 0°C to 55°C |
| Interface | GPIB (IEEE-488), RS-232 |
Anritsu 68169B Options:
- 68169B - Option 1 - Rack mounting kit, includes one set of track slides (90° tilt capability), mounting ears, and front panel handles for mounting in a standard 19-inch equipment rack
- 68169B - Option 2A - Step attenuator (10 dB/step, high-end frequency of ≤26.5 GHz, rated output power is reduced)
- 68169B - Option 2B - Step attenuator (10 dB/step, high-end frequency of ≤40 GHz, rated output power is reduced)
- 68169B - Option 2C - Step attenuator (10 dB/step, high-end frequency of ≤50 GHz, rated output power is reduced)
- 68169B - Option 2D - Step attenuator (10 dB/step, high-end frequency of ≤60 GHz, rated output power is reduced)
- 68169B - Option 6 - Phase modulation capability FM input and FM generator become FM/øM input and FM/øM generator
- 68169B - Option 7 - Generators deletes the internal AM and FM generators; External AM and FM capability remains unchanged
- 68169B - Option 8 - Internal power meter adds an internal power meter compatible with 560-7, 5400-7, or 6400-71 series detectors
- 68169B - Option 9 - Rear panel RF output (moves RF output connector to the rear panel)
- 68169B - Option 10 - Complex modulation (user defined modulation includes serial cable and Windows® based software)
- 68169B - Option 11 - 0.1 Hz frequency resolution (provides frequency resolution of 0.1 Hz)
- 68169B - Option 14 - Wiltron 360B VNA compatibility (modifies rack mounting hardware to mate unit in Wiltron 360B VNA console)
- 68169B - Option 15 - High power output (provides high-power from 2 to 26.5 GHz)
- 68169B - Option 16 - High stability time base (adds an ovenized, 10 MHz crystal oscillator as a high-stability time base)
- 68169B - Option 17 - Delete front panel (deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed)
- 68169B - Option 18 - MM-wave bias (rear panel bias output to drive 54000-XX WRXX multiplier, BNC twinax)
- 68169B - Option 19 - SCPI programmability adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0
- 68169B - Option 20 - SCAN modulator (adds an internal SCAN modulator for simulating high-depth amplitude modulated signals)
| Model | 68169B |
|---|
The Anritsu 68169B Synthesized CW Generator delivers 10 MHz to 65 GHz frequency coverage, with ultra-low SSB phase noise (-100 dBc at 10 kHz offset from 10 GHz), optional 0.1 Hz resolution, and output levels up to +17 dBm. It supports waveguide extensions up to 110 GHz, AM/FM/phase/pulse modulation, step and analog sweep modes, self-test, secure mode, and user-level flatness correction.
This versatile signal source is designed for local oscillator replacement and demanding CW applications, with user-downloaded complex modulation and master/slave operation for flexible system integration.
Testwall can supply the used Anritsu 68169B, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Anritsu 68169B.
