Anritsu 68369B
| Attribute | Value |
|---|---|
| Frequency Range | 2 MHz to 20 GHz |
| Output Power Range | -20 dBm to +20 dBm |
| Frequency Resolution | 1 Hz |
| Phase Noise | -116 dBc/Hz at 10 kHz offset (typical) |
| Switching Speed | Less than 10 ms (typical) |
| Modulation Types | AM, FM, Phase, and Pulse Modulation |
| Frequency Reference | Internal 10 MHz OCXO / External Reference Input |
| Output Connector | Type-N Female (50 Ohm) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Interface | GPIB (IEEE-488) and RS-232 |
Anritsu 68369B Options:
- 68369B - Option 1 - Rack mounting kit, includes one set of track slides (90° tilt capability), mounting ears, and front panel handles for mounting in a standard 19-inch equipment rack
- 68369B - Option 2A - Step attenuator (10 dB/step, high-end frequency of ≤26.5 GHz, rated output power is reduced)
- 68369B - Option 2B - Step attenuator (10 dB/step, high-end frequency of ≤40 GHz, rated output power is reduced)
- 68369B - Option 2C - Step attenuator (10 dB/step, high-end frequency of ≤50 GHz, rated output power is reduced)
- 68369B - Option 2D - Step attenuator (10 dB/step, high-end frequency of ≤60 GHz, rated output power is reduced)
- 68369B - Option 6 - Phase modulation capability FM input and FM generator become FM/øM input and FM/øM generator. Not available with Option 7
- 68369B - Option 7 - Deletes the internal AM and FM generators. External AM and FM capability remains unchanged. Not available in combination with Option 6, 8, 10 or 20
- 68369B - Option 8 - Internal power meter adds an internal power meter compatible with 560-7, 5400-7, or 6400-71 series detectors. Not available with Option 7
- 68369B - Option 9 - Rear panel RF output (moves RF output connector to the rear panel)
- 68369B - Option 10 - Complex modulation (user defined modulation includes serial cable and Windows® based software). Not available with Option 7
- 68369B - Option 11 - 0.1 Hz frequency resolution (provides frequency resolution of 0.1 Hz)
- 68369B - Option 14 - Wiltron 360B VNA compatibility (modifies rack mounting hardware to mate unit in Wiltron 360B VNA console)
- 68369B - Option 15 - High power output (provides high-power from 2 to 26.5 GHz)
- 68369B - Option 16 - High stability time base (adds an ovenized, 10 MHz crystal oscillator as a high-stability time base)
- 68369B - Option 17 - Delete front panel (deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed)
- 68369B - Option 18 - MM-wave bias (rear panel bias output to drive 54000-XX WRXX multiplier. BNC twinax; not available with Option 20)
- 68369B - Option 19 - SCPI programmability adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.2–1987
| Model | 68369B |
|---|
The Anritsu 68369B Synthesized Sweep/Signal Generator covers an impressive frequency range of 0.01 to 40 GHz, with ultra-low SSB phase noise of –100 dBc at 10 kHz offset from 10 GHz. It supports waveguide extensions up to 110 GHz, offering maximum power of +17 dBm and minimum power of –125 dBm. With internal AM, FM, øM, and pulse modulation, alongside user-downloaded complex modulation, it ensures superior performance for LO duties, signal simulation, and ATE applications.
Designed for precision and flexibility, the 68369B is ideal for component analysis, RF testing, and advanced system development. Its economical upgrade options make it a versatile choice for evolving requirements.
Testwall can supply the used Anritsu 68369B Synthesized Sweep/Signal Generator, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Anritsu 68369B Synthesized Sweep/Signal Generator.
