Sorensen
Sorensen DHP 30
0-83 300.0V Power Supply
0 – 30 V DC Ausgangsspannung
bis zu 1500 W Ausgangsleistung
0 – 50 A Ausgangsstrom
1 Ausgang Anzahl der Ausgänge
Konstantspannung (CV) / Konstantstrom (CC) Regelungsart
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 30 V DC |
| Ausgangsleistung | bis zu 1500 W |
| Ausgangsstrom | 0 – 50 A |
| Anzahl der Ausgänge | 1 Ausgang |
| Regelungsart | Konstantspannung (CV) / Konstantstrom (CC) |
| Eingangsspannung | 115 V AC / 230 V AC (umschaltbar) |
| Eingangsfrequenz | 47 – 63 Hz |
| Spannungsregelung (Lastregulierung) | ≤ 0,01 % + 2 mV |
| Stromwelligkeit und -rauschen | ≤ 3 mA RMS |
| Betriebstemperaturbereich | 0 °C – 40 °C |
Sorensen DHP 30 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
