Sorensen
Sorensen DHP 60
0-33 600.0V Power Supply
0 – 60 V DC Ausgangsspannung
bis zu 1800 W Ausgangsleistung
0 – 30 A Ausgangsstrom
RS-232, GPIB (optional), Analoge Programmierung Programmierschnittstellen
≤ 0,01 % + 2 mV Spannungsregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 60 V DC |
| Ausgangsleistung | bis zu 1800 W |
| Ausgangsstrom | 0 – 30 A |
| Programmierschnittstellen | RS-232, GPIB (optional), Analoge Programmierung |
| Spannungsregelung (Lastregulierung) | ≤ 0,01 % + 2 mV |
| Stromwelligkeit und -rauschen | ≤ 20 mA RMS |
| Spannungswelligkeit und -rauschen | ≤ 15 mV RMS |
| Eingangsspannung | 180 – 264 V AC, einphasig, 47 – 63 Hz |
| Betriebstemperaturbereich | 0 °C bis +50 °C |
| Gehäuseformat | 19-Zoll-Rackeinbau, 2 HE |
Sorensen DHP 60 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
