Anritsu
Anritsu 69397B
10MHz-65GHz Signal Generator
2 MHz – 20 GHz Rango de Frecuencia
+20 dBm Potencia de Salida Máxima
0,001 Hz Resolución de Frecuencia
-116 dBc/Hz a 10 kHz de separación (a 10 GHz) Pureza Espectral (SSB Phase Noise)
AM, FM, Fase y Pulso Modulación
| Atributo | Valor |
|---|---|
| Rango de Frecuencia | 2 MHz – 20 GHz |
| Potencia de Salida Máxima | +20 dBm |
| Resolución de Frecuencia | 0,001 Hz |
| Pureza Espectral (SSB Phase Noise) | -116 dBc/Hz a 10 kHz de separación (a 10 GHz) |
| Modulación | AM, FM, Fase y Pulso |
| Impedancia de Salida | 50 Ohmios |
| Conector de Salida RF | APC 3.5 mm (macho) |
| Referencia de Frecuencia Interna | Oscilador de referencia de 10 MHz con estabilidad de envejecimiento de ±1 ppm/año |
| Interfaz de Control Remoto | GPIB (IEEE-488) |
| Alimentación Eléctrica | 100–240 V CA, 50/60 Hz |
Anritsu 69397B Options:
- 69397B - Option 1 - Rack Mounting: Rack mount kit containing a set of track slides (90° tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 48 cm equipment rack
- 69397B - Option 2A - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced
- 69397B - Option 2B - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤40 GHz. Rated RF output power is reduced
- 69397B - Option 2C - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤50 GHz. Rated RF output power is reduced
- 69397B - Option 2D - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤60 GHz. Rated RF output power is reduced
- 69397B - Option 2E - Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤8.4 GHz. Rated RF output power is reduced
- 69397B - Option 2F - Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced
- 69397B - Option 6 - Phase Modulation (ΦM): Provides phase modulation capability. FM input, FM output and FM generator become FM/ΦM input, FM/ΦM output and FM/ΦM generator
- 69397B - Option 7 - Delete AM/FM Generators: Deletes the internal AM and FM generators. External AM and FM capability remains unchanged. (Not available in combination with Option 8 or Option 20)
- 69397B - Option 8 - Internal Power Measurement: Adds an internal power measurement function that is compatible with Anritsu 560-7, 5400-71 or 6400-71 series detectors. (Not available in combination with Option 7)
- 69397B - Option 9 - Rear Panel RF Output: Moves RF output connector to the rear panel
- 69397B - Option 10 - User-defined Modulation Capability: Provides user-defined waveform capability. Requires controller (not included). Includes cable and Windows-based software
- 69397B - Option 11 - 0.1 Hz Frequency Resolution: Provides frequency resolution of 0.1 Hz
- 69397B - Option 14 - Anritsu 360B VNA Compatibility: Modifies rack mounting hardware to mate the unit in an Anritsu 360B VNA console
- 69397B - Option 15B - High Power Output: Adds high-power RF components to the instrument in the 2–20 GHz frequency range
- 69397B - Option 16 - High Stability Time Base: Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base. Derate phase noise specification at 10 Hz offset by 8 dB
- 69397B - Option 17A - Delete Front Panel: Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed
- 69397B - Option 18 - mmWave Bias Output: Adds rear panel bias output to drive 54000-xWRxx millimeter wave source modules. BNC Twinax connector. (Not available in combination with Option 20)
- 69397B - Option 19 - SCPI Programmability: Adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.2–1987
- 69397B - Option 21A - Low Phase Noise, Non-pulsed Digital Downconverter: Replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW only from 10 MHz to 2.2 GHz
- 69397B - Option 21B - Low Phase Noise, Pulsed Digital Downconverter: Replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW with pulse modulation from 10 MHz to 2.2 GHz
- 69397B - Option 22 - 0.1 Hz to 10 MHz Audio Frequency: Adds CW and step sweep frequency coverage below 10 MHz. No modulation is available below 10 MHz. (Not available in combination with Option 20)
| Model | 69397B |
|---|
El Keysight (Anritsu) 69397B es un generador RF de alto rendimiento que cubre de 0,010 a 65 GHz, con ruido de fase ultra-bajo, conmutación rápida (< 5 ms) y amplio rango dinámico. Incorpora generadores internos de AM, FM y ΦM con múltiples formas de onda, además de modulación externa, disparo de pulsos flexible y funciones avanzadas de barrido digital y analógico. La potencia de salida oscila entre +17 dBm y −140 dBm con control preciso del nivel, ideal para entornos de pruebas RF exigentes.
Los ingenieros confían en el Keysight (Anritsu) 69397B para probar rigurosamente filtros, amplificadores y otros componentes RF gracias a sus niveles de salida precisos, rapidez de barrido y sólidas capacidades de simulación de señal.
Testwall puede suministrar el Keysight (Anritsu) 69397B usado, completamente probado. Con soporte experto y entrega global, Testwall garantiza instrumentación de alto rendimiento con fiabilidad y calidad de servicio inigualables. Por favor, contáctanos directamente si necesitas calibración o reparación del Keysight (Anritsu) 69397B.
