Anritsu
Anritsu MG3694C
Signal Generator 2-40 GHz
2 GHz a 40 GHz Rango de Frecuencia
+20 dBm (típico) Potencia de Salida Máxima
0,001 Hz Resolución de Frecuencia
-80 dBc/Hz a 10 kHz de desplazamiento (típico) Pureza Espectral (Ruido de Fase)
AM, FM, ΦM, Pulso y modulación I/Q Tipos de Modulación
| Atributo | Valor |
|---|---|
| Rango de Frecuencia | 2 GHz a 40 GHz |
| Potencia de Salida Máxima | +20 dBm (típico) |
| Resolución de Frecuencia | 0,001 Hz |
| Pureza Espectral (Ruido de Fase) | -80 dBc/Hz a 10 kHz de desplazamiento (típico) |
| Tipos de Modulación | AM, FM, ΦM, Pulso y modulación I/Q |
| Rango de Control de Nivel de Potencia | -20 dBm a +20 dBm |
| Resolución de Nivel de Potencia | 0,01 dB |
| Interfaz de Control Remoto | GPIB, USB y LAN (Ethernet) |
| Referencia de Frecuencia Interna | Oscilador de referencia interna de 10 MHz con estabilidad de ±1 ppm |
| Alimentación Eléctrica | 100-240 V CA, 50/60 Hz |
Anritsu MG3694C Options:
- MG3694C - 1A - Rack Mount with slides. Rack mount kit containing a set of track slides, mounting ears, and front panel handles to let the instrument be mounted in a standard 19-inch equipment rack.
- MG3694C - 1B - Rack Mount without slides. Modifies rack mounting hardware to install unit in a console that has mounting shelves. Includes mounting ears and front panel handles.
- MG3694C - 2A - Mechanical Step Attenuator. Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694C - 2B - Mechanical Step Attenuator. Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694C - 2C - Mechanical Step Attenuator. Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694C - 3 - Ultra Low Phase Noise. Adds new modules to significantly reduce SSB phase noise.
- MG3694C - 3X - Premium Phase Noise. Improves Option 3 < 1 kHz offset.
- MG3694C - 4 - 8 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise version. Uses a digital down converter to significantly reduce SSB phase noise. All specifications apply ≥ 10 MHz.
- MG3694C - 5 - 8 MHz to 2 GHz RF Coverage. Uses an analog down converter. All specifications apply ≥ 10 MHz.
- MG3694C - 6 - Analog Sweep Capability. When used with Option 4, analog sweep capability is limited to ≥ 500 MHz.
- MG3694C - 7 - IF Up-Conversion. Adds an internal 40 GHz mixer for up-converting an IF signal.
- MG3694C - 8 - Power Monitor. Adds internal power measurement capability. Not available with Option 9.
- MG3694C - 9K - Rear Panel Output. Moves the RF output connector to the rear panel. Not available with Option 8.
- MG3694C - 9V - Rear Panel Output. Moves the RF output connector to the rear panel. Not available with Option 8.
- MG3694C - 10 - User-Defined Modulation Waveform Software. External software package provides the ability to download user-defined waveforms into the memory of the internal waveform generator, serially or via GPIB or Ethernet. Requires Option 27.
- MG3694C - 12 - Frequency and Phase Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of an LF Generator, Option 27.
- MG3694C - 14 - Amplitude Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of an LF Generator, Option 27.
- MG3694C - 15A - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 15B - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 15C - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 15D - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 16 - High Stability Time Base. Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base.
- MG3694C - 17 - Delete Front Panel. Deletes the front panel for use in remote control applications. Only available with Options 1A or 1B.
- MG3694C - 18 - DC Output. Adds a rear panel BNC Twinax connector supplying +15 VDC, 1A (nominal). Not available with Option 7 or 15x.
- MG3694C - 22 - 0.1 Hz to 10 MHz Audio coverage. Uses a DDS for coverage down to approximately DC. Output power derated by 2 dB. Requires Option 4 or 5.
- MG3694C - 26A - Pulse Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of a Pulse Generator, Option 27.
- MG3694C - 26B - Pulse Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of a Pulse Generator, Option 27.
- MG3694C - 27 - Internal LF and Pulse Generators. Provides modulation waveforms for internal AM, FM, ΦM and Pulse. Not available without Option 12, 14, or 26.
- MG3694C - 28A - Analog Modulation Suite. Bundles Options 12, 14, 26 and 27, offering internally- and externally-driven AM, FM, ΦM, and Pulse Modulation.
- MG3694C - 28B - Analog Modulation Suite. Bundles Options 12, 14, 26 and 27, offering internally- and externally-driven AM, FM, ΦM, and Pulse Modulation.
- MG3694C - 36 - Ultra-Stable Phase Tracking. Provides the capability for ultra-stable phase tracking between instruments using the internal 100 MHz reference. Requires Option 3, 3X, or 3XA.
- MG3694C - 98 - Standard Calibration to ISO17025 and ANSI/NCSL Z540-1. Provides a calibration certificate, decal, and tamper seals.
- MG3694C - 99 - Premium Calibration to ISO17025 and ANSI/NCSL Z540-1. Provides everything included with Option 98 plus test report and uncertainty data.
| Model | MG3694C |
|---|
El Anritsu MG3694C es un generador de señales de banda ancha que cubre frecuencias desde 0,1 Hz hasta 40 GHz en una salida coaxial única, ampliable a 325 GHz con multiplicadores externos. Ofrece flexibilidad excepcional para pruebas RF y de microondas, con tres opciones de desempeño de ruido de fase (Estándar, Ultra Bajo, Premium) y completas capacidades de modulación, incluida la modulación IQ con soporte de entrada IF.
Diseñado para reemplazar el MG3690B, este generador ofrece un rendimiento avanzado para simulaciones de señal, desde aplicaciones RF básicas hasta aplicaciones de microondas altamente complejas, manteniendo la compatibilidad con modelos anteriores de Anritsu.
Testwall puede suministrar el Anritsu MG3694C usado, completamente probado. Con soporte de expertos y entrega mundial, Testwall garantiza instrumentación de alto rendimiento con fiabilidad y calidad de servicio inigualables. Contáctanos directamente si necesitas calibración o reparación del Anritsu MG3694C.
