California Instruments
California Instruments RS90-3PI
High Power AC and DC Power Test System, 90kVA, 3-Phase, Programmable
90 kVA Potencia de salida
3 fases Número de fases
0 – 300 V CA (por fase) Rango de tensión de salida
45 Hz – 500 Hz Rango de frecuencia de salida
208 V / 400 V CA trifásico Tensión de entrada
| Atributo | Valor |
|---|---|
| Potencia de salida | 90 kVA |
| Número de fases | 3 fases |
| Rango de tensión de salida | 0 – 300 V CA (por fase) |
| Rango de frecuencia de salida | 45 Hz – 500 Hz |
| Tensión de entrada | 208 V / 400 V CA trifásico |
| Distorsión armónica total (THD) | Menos del 0,5% |
| Interfaz de control | Panel frontal con pantalla digital y control remoto GPIB/RS-232 |
| Forma de onda de salida | Senoidal pura |
| Regulación de tensión | ±0,1% de la tensión nominal de salida |
| Dimensiones y peso aproximados | Formato rack 19 pulgadas, peso aproximado de 270 kg |
California Instruments RS90-3PI Options:
- RS90-3PI - 208 - Configured for 208 V ±10% L-L, 4 wire input
- RS90-3PI - 230 - Configured for 230 V ±10% L-L, 4 wire input
- RS90-3PI - 380 - Configured for 380V +/- 10% L-L, 4 Wire Input
- RS90-3PI - 400 - Configured for 400 V ±10% L-L, 4 wire input
- RS90-3PI - 480 - Configured for 480 V ±10% L-L, 4 wire input
- RS90-3PI - -150 - Configured for 150 V AC and 200 V DC output ranges
- RS90-3PI - -300 - Configured for 300 V AC and 400 V DC output ranges
- RS90-3PI - -411 - IEC 1000-4-11 test firmware
- RS90-3PI - -LF - Limits maximum frequency to 500 Hz; modifies output frequency control to ± 0.25%
- RS90-3PI - -FC - Modifies output frequency control to ± 0.25%
- RS90-3PI - -LAN - Ethernet Interface
- RS90-3PI - -413 - IEC 1000-4-13 Harmonics & Interharmonics test firmware
- RS90-3PI - -HV - Adds 400 V L-N (AC-only output range)
- RS90-3PI - -HF - Increases max. frequency to 905 Hz
- RS90-3PI - -XV - Adds other AC-only output range (consult factory)
- RS90-3PI - -LKM - Clock/Lock Master
- RS90-3PI - -LKS - Clock/Lock Auxiliary
- RS90-3PI - -WHM - Watt-Hour Measurement option
- RS90-3PI - -SNK - Bidirectional auto source and sink mode; offers up to 100% power sink capability
- RS90-3PI - -SNK-DC - Sink DC current mode
- RS90-3PI - -EXTD - External Drive allows external signal control
- RS90-3PI - -ABD - ABD0100.1.8 Test Option, Rev. D-E
- RS90-3PI - -AMD - Airbus AMD24 Test, Rev. A-C
- RS90-3PI - -A350 - Airbus Test Software, Rev A-C
- RS90-3PI - -B787 - Boeing 787 Test Software, Rev A-C additional
- RS90-3PI - -704 - Mil Std 704 A-F test firmware/software
- RS90-3PI - -160 - RTCA/DO-160D, DO-160E, and EUROCAE test firmware
| Model | RS90-3PI |
|---|
California Instruments RS90-3PI AC Power Source The California Instruments RS90-3PI power source consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications. The RS90-3PI is much more than a programmable AC, DC or AC+DC power source. It also incorporates an advanced digital signal processor based data acquisition system that continuously monitors all AC source and load parameters. Common AC and DC measurement parameters are automatically provided by the data acquisition system and are displayed in numeric form on the front panel LCD display. The built-in output transient generation and read-back measurement capability of the California Instruments RS90-3PI offers the convenience of a powerful, and easy to use, integrated test system. It delivers up to 90 kVA of AC or AC + DC power. In DC mode, 50% of the AC power level is available. For advanced test applications, the programmable controller version offers full arbitrary waveform generation, time and frequency domain measurements, and voltage and cur waveform capture. The RS90 can deliver up to 720 Amps of repetitive peak cur (150 V AC range) per phase to handle high crest factor three phase loads. Specifications of the California Instruments RS90-3PI AC Power Source includes: See Datasheet for Full Specifications
