emtest
emtest COMPACT NX7
Multifunctional Test Generator for Transients
9 kHz – 30 MHz Rango de frecuencia
Hasta 10 V (EMC) Nivel de tensión de salida
50 Ω Impedancia de salida
IEC 61000-4-6, ISO 11452-7 Normas compatibles
AM (modulación de amplitud) al 80% Tipo de modulación
| Atributo | Valor |
|---|---|
| Rango de frecuencia | 9 kHz – 30 MHz |
| Nivel de tensión de salida | Hasta 10 V (EMC) |
| Impedancia de salida | 50 Ω |
| Normas compatibles | IEC 61000-4-6, ISO 11452-7 |
| Tipo de modulación | AM (modulación de amplitud) al 80% |
| Resolución de frecuencia | 1 Hz |
| Interfaz de control | USB, LAN (Ethernet) |
| Pantalla | Pantalla táctil a color integrada |
| Alimentación eléctrica | 100 – 240 V CA, 50/60 Hz |
| Dimensiones (An x Al x Pr) | Formato compacto de sobremesa, apto para uso en laboratorio |
emtest COMPACT NX7 Options:
- COMPACT - CCI - Capacitive coupling clamp as per IEC/EN 61000-4-4
- COMPACT - CCI PVKIT 1 - Adapter set for capacitive coupling clamp calibration (Transducer plate, support for positioning, PVF AD 3)
- COMPACT - PVF 50 - 100:1 divider, 50 ohm
- COMPACT - PVF 1000 - 500:1 divider, 1,000 ohm
- COMPACT - PVF BKIT 1 - Kit for burst pulse verification consisting of PVF 50, PVF 1000 and adapter for EUT port in a plastic case
- COMPACT - PVF AD 1 - Adapter to match PVF 50 load resistor to the EUT supply of NX-series coupling network, 3-phase coupling network
- COMPACT - ITP - Immunity test probes (electrical field generation)
- COMPACT - ITP/H - Immunity test probe (magnetic field generation)
- COMPACT - DCD 7 sr-4-x - Coupling network for 4 signal/data lines as per IEC/EN 61000-4-5 Ed 3.0
- COMPACT - DCD 7 sr-8-x - Coupling network for 8 signal/data lines as per IEC/EN 61000-4-5 Ed 3.0
- COMPACT - DCD 7 st-4-1 - Coupling/decoupling network for 4 unshielded symmetrical lines (communication lines) as per IEC/EN 61000-4-5 Ed 3.0
- COMPACT - DCD 7 st-8-1 - Coupling/decoupling network for 8 unshielded symmetrical lines (communication lines) as per IEC/EN 61000-4-5 Ed 3.0
- COMPACT - HSC 4-8 - Coupling/decoupling network for testing unshielded and shielded high-speed communication lines (Ethernet lines)
- COMPACT - SPN 508N1 - Surge/Ringwave protection network to reduce the surge voltage to less than 10 V at the AE
- COMPACT - V 4780 - Tapped autotransformer as per IEC/EN 61000-4-11 Ed 2.0
- COMPACT - V 4780S2 - Tapped autotransformer as per IEC/EN 61000-4-11 Ed 2.0 with automatic change of tap
- COMPACT - variac NX 1-260-16 - Motorized variac (0 - 250 V, 16 A)
- COMPACT - variac NX 1-260-32 - Motorized variac (0 - 250 V, 32 A)
- COMPACT - MS 100N - Magnetic field coil, 1 m x 1 m, up to >1000 A/m
- COMPACT - MC 2630 - Current transformer for magnetic fields up to 30 A/m
- COMPACT - MC 26100 - Current transformer for magnetic fields up to 1,000 A/m
- COMPACT - CA PFS - Calibration box for inrush current verification as per IEC/EN 61000-4-11
- COMPACT - CA PFS-100R - 100 ohm low inductive load resistor, for rise and fall time verification
- COMPACT - coupling NX7 - 3-phase coupling/decoupling networks as per IEC/EN 61000-4-4 and IEC/EN 61000-4-5, up to 200 A per phase
- COMPACT - iec.control - Remote control and documentation software including standard test routines and reporting capabilities; includes UOC USB-Optolink Converter
- COMPACT - UOC - USB-Optolink Converter, Optical Fibre cable, 5 m
- COMPACT - bsp-1-300-16 - Burst, Surge, Power Fail, 300 V, 16 A
- COMPACT - bspr-1-300-16 - Burst, Surge, Power Fail, Ringwave, 300 V, 16 A
- COMPACT - bspt-1-300-16 - Burst, Surge, Power Fail, Telecom Surge, 300 V, 16 A
- COMPACT - bsprt-1-300-16 - Burst, Surge, Power Fail, Ringwave, Telecom Surge, 300 V, 16 A
- COMPACT - bs-1-300-16 - Burst, Surge, 300 V, 16 A
- COMPACT - bst-1-300-16 - Burst, Surge, Telecom Surge, 300 V, 16 A
- COMPACT - sp-1-300-16 - Surge, Power Fail, 300 V, 16 A
- COMPACT - st-1-300-16 - Surge, Telecom Surge, 300 V, 16 A
- COMPACT - bsp-1-400-16 - Burst, Surge, Power Fail, 400 V, 16 A
- COMPACT - bspr-1-400-16 - Burst, Surge, Power Fail, Ringwave, 400 V, 16 A
- COMPACT - bspt-1-400-16 - Burst, Surge, Power Fail, Telecom Surge, 400 V, 16 A
- COMPACT - bsprt-1-400-16 - Burst, Surge, Power Fail, Ringwave, Telecom Surge, 400 V, 16 A
| Model | COMPACT |
|---|
EMTEST COMPACT NX7 Multifuntional Test Generator The compact Next Generation NX7 is the most versatile tester to address transient and power fail requirements for both international and commercial standards.
Featuring an easy-to-use color touch screen, the NX7 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking. Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase. The EMTest compact NX7 is a standalone generator which includes everything necessary to perform fully compliant tests. The NX7 is the first generator that recognizes the connected EUT power configuration. Only coupling selections to active lines are enabled. Non existing lines will be disabled from the menu settings. Pre-programmed routines with common Test Standards allow maximum user convenience. The compact NX7 series simulators for Burst, Surge, Telecom Surge and Power Fail are available with a maximum test voltage of up to 7.0 kV. Features for the EMTEST COMPACT NX7 Multifuntional Test Generator Include:Smallest compact generator with 7" touch screen Burst 5.5 kV, Surge & Ringwave 7.0 kV ,Power Fail Selective test library adapted to the EUT setting Built-in single phase CDN 400 V/32 A Manual front panel operation with setup pictures Separate key for START/STOP operation with LED Monitor outputs for peak voltage and cur
Featuring an easy-to-use color touch screen, the NX7 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking. Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase. The EMTest compact NX7 is a standalone generator which includes everything necessary to perform fully compliant tests. The NX7 is the first generator that recognizes the connected EUT power configuration. Only coupling selections to active lines are enabled. Non existing lines will be disabled from the menu settings. Pre-programmed routines with common Test Standards allow maximum user convenience. The compact NX7 series simulators for Burst, Surge, Telecom Surge and Power Fail are available with a maximum test voltage of up to 7.0 kV. Features for the EMTEST COMPACT NX7 Multifuntional Test Generator Include:
