Keysight (Agilent)
Keysight (Agilent) ECP-E26A
Power Sensor, 50 MHz - 26.5 GHz, -70 to 20 dBm
50 MHz a 26,5 GHz Rango de frecuencia
-70 a +20 dBm Rango de potencia
+23 dBm (200 mW) Potencia máxima
3,5 mm macho Conector
38 × 30 × 102 mm Dimensiones (An × Al × P)
| Atributo | Valor |
|---|---|
| Rango de frecuencia | 50 MHz a 26,5 GHz |
| Rango de potencia | -70 a +20 dBm |
| Potencia máxima | +23 dBm (200 mW) |
| Conector | 3,5 mm macho |
| Dimensiones (An × Al × P) | 38 × 30 × 102 mm |
| Tipo de sensor | diodo, promedio (CW), amplio rango dinámico |
| ROE | 1,19 máx. a 100 MHz a 8 GHz; 1,26 máx. a 18 a 26,5 GHz |
| Medidores compatibles | EPM E4418A/B, E4419A/B, EPM-P E4416A/E4417A, N1913A/N1914A, P-serie |
| Peso | 0,18 kg |
Medidores de potencia compatibles
The Agilent ECP-26A (aka E4413A) diode power sensor, with wide dynamic range, is designed for use with the EPM and EPM-P series power meters for power measurements on CW signals from 50 MHz to 26.5 GHz. The HP E4413A power sensor provides extremely low SWR to minimize the source and sensor mismatch errors. Also, for comprehensive error correction, the calibration factors, linearity and temperature error-correction information are stored in EEPROM.
Specifications of the Agilent ECP-26A Power Sensor include:
- Frequency range: 50 MHz to 26.5 GHz
- Measurement range: 100 pW to 100 mW ( -70 dBm to +20 dBm)
- 50 ohm input impedance
- 3.5mm (m) connector
- Calibration factors stored in EEPROM
- Compatible with the EPM and EPM-P series power meters
