Keysight Technologies DSOX92504Q

Keysight (Agilent) DSOX92504Q Options:

• DSOX92504Q - 050 - 50 Mpts/ch memory
• DSOX92504Q - 100 - 100 Mpts/ch memory
• DSOX92504Q - 200 - 200 Mpts/ch memory
• DSOX92504Q - 500 - 500 Mpts/ch memory
• DSOX92504Q - 01G - 1 Gpt/ch memory
• DSOX92504Q - 02G - 2 Gpts/ch memory
• DSOX92504Q - 001 - PrecisionProbe - Characterize and compensate for loss from your input to your oscilloscope to 33 GHz
• DSOX92504Q - 827 - PrecisionProbe Advanced - Characterize and compensate for loss from your input to your oscilloscope to 63 GHz
• DSOX92504Q - 009 - InfiniiScan - Trigger on unique events including using zones on multiple channels and non-monotonic edges
• DSOX92504Q - 002 - EZJIT - Basic jitter analysis with measurement trending, time interval error and many more measurements
• DSOX92504Q - 004 - EZJIT Plus - Get in-depth analysis of your jitter by decomposing your jitter
• DSOX92504Q - 070 - EZJIT Complete - Understand your full real time by decomposing the noise that is impacting your margins
• DSOX92504Q - 003 - Serial data analysis - Recover clocks to 120 Gb/s and view real-time eyes. Run mask testing
• DSOX92504Q - 012 - Serial data equalization - Properly emulate your design equalizers including FFE, CTLE and DFE
• DSOX92504Q - 013 - InfiniiSim Basic - Waveform transformation software to remove or add three elements in your link
• DSOX92504Q - 014 - InfiniiSim Advanced - Waveform transformation software to remove or add 27 elements in your link
• DSOX92504Q - 010 - User-defined function - Create custom functions that run live on your oscilloscope with MathWorks MATLAB software
• DSOX92504Q - 061 - MATLAB Basic - Purchase an introductory MATLAB software package to acquire scope measurements into the MATLAB environment
• DSOX92504Q - 062 - MATLAB Standard - Purchase a typical MATLAB software package, signal processing and filter design toolboxes on the same PO as your scope
• DSOX92504Q - 065 - User-defined function with MATLAB - Create and execute custom functions that run live on your oscilloscope. Includes MATLAB standard software (Option 062)
• DSOX92504Q - 040 - User-defined application - Fully customizable automated application for your Infiniium oscilloscope
• DSOX92504Q - 112 - PCI Express Gen 1/2/3/4 compliance - Guarantee your PCI Express Gen4 designs
• DSOX92504Q - 077 - HDMI 2.0 compliance - Quickly verify and debug your high-definition multimedia interface
• DSOX92504Q - 043 - SAS-2 compliance - Automatically execute SAS electrical checklist tests
• DSOX92504Q - 076 - SAS-3 compliance - Automatically execute SAS electrical checklist tests
• DSOX92504Q - 045 - DisplayPort source compliance - Verify and debug your DisplayPort interface designs
• DSOX92504Q - 031 - DDR1 verification - Save time with automated testing based on JEDEC DDR1 and LPDDR1 specifications
• DSOX92504Q - 032 - DDR3 verification - Save time with automated testing based on JEDEC DDR3 specifications
• DSOX92504Q - 033 - DDR2 verification - Save time with automated testing based on JEDEC DDR2 and LPDDR2 specifications
• DSOX92504Q - 074 - 10GBASE-KR compliance - Test to IEEE 802.3 clause 49 over a single backplane lane
• DSOX92504Q - 035 - MIPI D-PHY verification - Execute D-PHY electrical checklist tests for CSI and DSI architectures
• DSOX92504Q - 047 - MIPI M-PHY verification - Execute M-PHY electrical tests
• DSOX92504Q - 060 - Energy Efficient Ethernet - Debug your 1000BASE-T, 100BASE-TX, and 10BASE-T Ethernet designs
• DSOX92504Q - 036 - 10-GBASE-T compliance - Coverage of the 10GBASE-T transmitter electrical specifications
• DSOX92504Q - 030 - XAUI compliance - XAUI validation with 10GBASE-CX4, CPRI, OBSAI, and Serial RapidIO support
• DSOX92504Q - 038 - SATA 6G compliance - Automated compliance testing for 1.5-Gbps, 3.0-Gbps and 6.0-Gbps SATA, and eSATA
• DSOX92504Q - 029 - USB 2.0 compliance - USB-IF recognized compliance for low/full and low/full/high-speed USB automated electrical test
• DSOX92504Q - 041 - USB 3.0 compliance - Validate and debug your USB 3.0 silicon, host, hub or device
• DSOX92504Q - 046 - USB HSIC - Validate and debug USB high speed inter-connect devices
• DSOX92504Q - 054 - MHL compliance - Validates MHL source designs according to the MHL 1.2 standard
• DSOX92504Q - 059 - Thunderbolt compliance - Measure the transmitter with the accuracy of the 90000 Q-Series
• DSOX92504Q - 049 - PCI Express Gen3 protocol - Time-correlated views of physical and transaction layer errors, 128/130-bit decoding
• DSOX92504Q - 048 - Ethernet 10GBASE-KR protocol - Full protocol analysis for 10GBASE-KR 64/66-bit decoder
• DSOX92504Q - 018 - SATA/SAS protocol - Simplify the validation of your SATA/SAS designs
• DSOX92504Q - 051 - DigRF v4 protocol - Extend your scope capability with DigRF v4 triggering and decode
• DSOX92504Q - 007 - I2C/SPI protocol - Extend your scope capability with I2C and SPI triggering and decode
• DSOX92504Q - 015 - RS232/UART protocol - Easily view the information sent over RS-232, RS-422, RS-485 or other UART serial buses
• DSOX92504Q - 016 - USB 2.0 protocol - Trigger on and quickly view USB packets, payload, header and detailed information
• DSOX92504Q - 017 - PCI Express Gen1 and 2 protocol - Quickly view packets, payload, header, and detailed information
• DSOX92504Q - 019 - MIPI D-PHY protocol - Easily view the information sent over MIPI serial buses
• DSOX92504Q - 063 - CAN/FlexRay protocol - View both protocol-layer information and physical-layer signal characteristics
• DSOX92504Q - 042 - JTAG protocol - Eliminate the difficult task of manually determining JTAG TAP controller states
• DSOX92504Q - 056 - SVID protocol - Decode and search on SVID technology
• DSOX92504Q - 052 - Unipro decode - Decode at the protocol level
• DSOX92504Q - A6J - ANSI Z540 compliant calibration
• DSOX92504Q - 1A7 - ISO17025 calibration
• DSOX92504Q - 820 - DVD RW
• DSOX92504Q - 808 - Performance verification de-skew fixture for InfiniiMax III probe
• DSOX92504Q - 1CM - Rackmount kit option