Keytek MINIZAP MZ-15 Options:
- MINIZAP - MZ-15/EC - Base ESD Simulator, contact-mode ±0.5 to >8 kV and air discharge ±0.5 to 15 kV, with digital display, rechargeable batteries, soft case
- MINIZAP - TPC-1 - True-ESD® fastest-risetime contact-mode tip
- MINIZAP - TPC-2A - IEC Contact Mode Omni-Tip™ with 0.7 to 1.0 ns risetime per IEC 61000-4-2
- MINIZAP - TPA-1 - Fastest air discharge tip for most realistic air discharge simulation
- MINIZAP - TPA-2 - IEC 61000-4-2 ball air discharge tip with slowed-down risetime
- MINIZAP - TPF-1 - Self-discharge tip
- MINIZAP - 50-MZ - Standoff spacer for air-discharge mode
- MINIZAP - VCP-1 - Vertical Coupling Plane, 0.5m x 0.5m, per IEC 61000-4-2 and ANSI C63.16, with bench-mount stand and MiniZap mounting provisions
- MINIZAP - HCP-1 - Horizontal Coupling Plane, 0.8m x 1.6m, per IEC 61000-4-2 and ANSI C63.16, includes roll of static-dissipative sheet insulator
- MINIZAP - MZT-11 - E-Field Simulation Tip for diagnostic static and dynamic electric field simulation
- MINIZAP - MZT-12 - H-Field Simulation Tip for diagnostic dynamic magnetic field simulation
- MINIZAP - MCA-1 - Hard carrying case (does not include space for VCP-1, HCP-1, BTS-1, TP-3)
- MINIZAP - DCA-2 - DC Output Calibration Attenuator, 10,000:1 ratio, for oscilloscope or meter monitoring of DC stored on discharge capacitor
- MINIZAP - CTC-3 - Coaxial Current Monitor per IEC 61000-4-2 and ANSI C63.16, >1 GHz capability, includes high-peak-power attenuator and scope cable
- MINIZAP - TP-3 - Full 1.5m x 1.5m Target Plane for mounting the CTC-3 coaxial target per IEC 61000-4-2
- MINIZAP - FCS-1 - Field and Corona Sensor Group including Common Monitor Unit HEC-1, H-Field sensor HFS-1, E-Field sensor EFS-1, and Pre-Discharge corona sensor CCS-1
- MINIZAP - MZEC1 - Model Group: MZ-15/EC + TPC-1 + TPF-1 + 50-MZ
- MINIZAP - MZEC2 - Model Group: MZEC1 + VCP-1
- MINIZAP - MZEC3 - Model Group: MZEC2 + diagnostic E and H field tips
- MINIZAP - MZEC4 - Model Group: MZEC3 + calibration accessories
| Model | MINIZAP |
|---|
The Keytek MiniZap MZ-15 (MZ15) is a battery operated, hand held 15kV ESD test simulator, used for performing contact mode and air discharge mode testing.The Thermo Keytek MiniZap is a long-time standard for ESD testing of products at the system level. The MiniZap allows users to meet both the 0.7 to 1.0ns rise time requirements of IEC 61000-4-2 as well as perform "real world" testing with faster rise time waves to determine how a product will really survive in its intended environment.ESD is often viewed as the most common cause of failure in microprocessor based systems and equipment. Testing of such systems demands clean, reproducible waveforms to avoid producing failures where none would exist in the field. The MiniZap waveforms not only meet the requirements of cur standards, but also meets the requirements for waveform purity when verified using a wide bandwidth instrument.The Thermo Keytek MiniZap is capable of up to 15kV air and 8.8kV contact testing and offers a wide selection of options that may be purchased now or in the future to meet your testing needs. The MiniZap performs compliant level ESD testing in accordance with IEC 61000-4-2 and ANSI C63.16The Keytek MZ-15 MiniZap ESD simulator meets mandatory requirements for company-wide ESD test programs and offers: High performance in a rugged hand-held unit for the manufacturing floor and the field as well as the lab Safely & easily generates reliable real world, repeatable & correlatable ESD simulation pulses Direct contact mode & air discharge testing, plus coupling planes for indirect ESD tests View the manufacturer's manual here
