Milmega
Milmega AS0825-65
Broadband Amplifier, 0.8 GHz - 2.5 GHz, 65W
0,8 GHz – 2,5 GHz Rango de Frecuencia
65 W Potencia de Salida
Mínimo 50 dB Ganancia
0 dBm Potencia de Entrada Máxima
50 Ohmios Impedancia
| Atributo | Valor |
|---|---|
| Rango de Frecuencia | 0,8 GHz – 2,5 GHz |
| Potencia de Salida | 65 W |
| Ganancia | Mínimo 50 dB |
| Potencia de Entrada Máxima | 0 dBm |
| Impedancia | 50 Ohmios |
| Conectores | Tipo N hembra |
| Alimentación Eléctrica | 220 V CA, 50/60 Hz |
| Temperatura de Operación | 0 °C – 40 °C |
| Dimensiones | formato rack 19 pulgadas, 3U |
| Aplicaciones | Pruebas de compatibilidad electromagnética (EMC), pruebas de inmunidad RF |
| Model | AS0825-65 |
|---|
MILMEGA AS0825-65 AMPLIFIER
The Milmega AS0825-65 Broadband Amplifier implements the lastest technologies with its innovative design. Its unique features and benefits include an impressive array of input/output and sample port options, cost effective power or bandwidth upgrades, unbeatable power density, built in-in protection and much more.
Features and Specifications of the MILMEGA AS0825-65 Amplifier include:
- Features:
- Maximum power
- Unbeatable power density
- Will maintain full forward power into any load condition
- Combiner / coupler integration as standard allows samples of incident and reflected power to be measured with virtually no loss
- 100% tested into short and open circuit
- Up to 250 watts in a single 3U unit
- Consistent over greater than octave bandwidths
- Broadband CW power output to 1 kW
- High visibility status and power indicators: Color LED bar graph displays on the front panel giving an indication of incident and reflected power
- 15 way rear mounted D-type allowing remote operation via TTL commands while providing access to an output signal sample
- All data is measured at 25 °C driven from a 50 W source and driving into a 50 W load
- Built-in protection:
- In the event of internal temperature exceeding 70 °C, the amplifier blocks will automatically switch off to avoid damage
- Unit incorporates a rear panel mounted connector for interlock BR2-female
- Easily rack mounted: Amplifiers are standard 3U high units and may be combined in rack mounted form to build higher power amplifiers
- Bench models: 3U high units have bench case options
- Specifications:
- Class leading linearity and noise specifications:
- Gain variation with temperature
- IP3 typically 10 dB> P1 dB
- Harmonics -20 dBc minimum
- Spurious (maximum) -70dBc
- Spurious (typical) -80 dBc
- Psat (minimum):
- 64.6 W
- 48.1 dBm
- P1dB (minimum):
- 57.5 W
- 47.6 dBm
- Noise figure (maximum): 6.0 dB
- Gain variation: ± 2.0 dB
- Harmonic distortion (maximum): -20 dBc
- Power consumption: 1000 W
- Primary power:
- 85-260 V (50/60 Hz)
- Input power (for rated output): 5 dBm
- Input power (no damage): 15 dBm
- Input VSWR (impedance 50 Ω nominal): 2:1 maximum
- Output VSWR (impedance 50 Ω nominal): 2:1 typical
- Load VSWR (any phase) is infinite
- Line input frequency: 47-65 Hz
- RF Input: Type N female
- RF Output: Type N female
