Tektronix TCP404XL

Tektronix TCP404XL PROBEThe Tektronix TCP404XL Cur Probe is a split-core probe that uses both transformer and Hall effect technology. When connected to Tektronix Oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC), or TekVPI (w/ TPA-BNC) interfaces, the Tektronix TCP404XL probe makes cur measurements and calculations simple and easy.Features and Specifications of the TCP404XL Cur Probe include:

Features:

AC/DC measurement capabilities
Automatic Scaling and Units
- Requires a TDS TEKPROBE Oscilloscope or a TekConnect oscilliscope with TCA-BNC
- Oscilloscope on-screen readout of magnitude and amps
- Reduces measurement errors with no more hand calculations
AC/DC input coupling
Low insertion impedance reduces DUT loading
Split-core design allows easy circuit connection
Status Indicators provide visual operating status and notification of potential error conditions including:
- Degauss, Probe open, Overload, Not terminated into 50 Ω, Noncompatible probe type
Lower DC drift and noise allows improved low-level cur measurements
Complies with IEC standards
Applications:
- Development and analysis solutions for designers, installers, and service personnel in Telecomm, Data Comm, computer, and semiconductor power electronics environments for:
  - Power supplies (switching and linear)
  - Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
  - Power Inverters/Converters
  - Electronic ballasts
  - Industrial/Consumer electronics
  - Mobile communications (phone, satellite, relay stations)
  - Motor drives
  - Transportation systems (electronic vehicles and trains, locomotives, avionics)

Specifications of TCP404XL Probe w/ TCPA400 Amplifier:

Characteristic:
- Bandwidth (-3 dB): DC – 2 MHz
- Rise Time: ≤175 ns
- Maximum Cur Ratings:
  - High-cur Sensitivity Range: 1 A/mV Range:
    - DC (continuous): 500 A
    - RMS (sinusoidal): 500 A
    - Peak Pulse: 750 A
- DC Accuracy (operating temp 0 °C to 50 °C): ±3% of reading
- DC Accuracy, typical (operating temp 23 °C ±5 °C): ±1% of reading
Nominal:
- Maximum Bare Wire Voltage:
  - 600 VRMS CAT I & II
  - 300 VRMS CAT III
- Lowest Measurable Cur (at ±3% accuracy at DC):
  - 1 A
  - Scope set to 1 mV/div and 20 MHz BW limited
- Insertion Impedance:
  - 0.1 mΩ at 10 kHz
  - 0.6 mΩ at 100 kHz
  - 8 mΩ at 1 MHz
  - 16 mΩ at 2 MHz
- Maximum Amp-Second Product (based on amplifier range setting):
  - NA – 1 A/mV
- AC-coupling Low-frequency Bandwidth (Low Pass – 3 dB point):
- Displayed RMS Noise (at 20 MHz bandwidth limit): ≤250 mARMS
- Signal Delay (delay to output BNC): 80 ns
- Probe Amplifier Inputs: 1
- Probe Open Indicator: Yes
- Overload Indicator: Yes
- Termination Indicator: Yes
- Noncompatible Probe Indicator: Yes

AC/DC measurement capabilities

Automatic Scaling and Units

Requires a TDS TEKPROBE Oscilloscope or a TekConnect oscilliscope with TCA-BNC
Oscilloscope on-screen readout of magnitude and amps
Reduces measurement errors with no more hand calculations

AC/DC input coupling

Low insertion impedance reduces DUT loading

Split-core design allows easy circuit connection

Status Indicators provide visual operating status and notification of potential error conditions including:

Degauss, Probe open, Overload, Not terminated into 50 Ω, Noncompatible probe type

Lower DC drift and noise allows improved low-level cur measurements

Complies with IEC standards

Applications:

Development and analysis solutions for designers, installers, and service personnel in Telecomm, Data Comm, computer, and semiconductor power electronics environments for:
- Power supplies (switching and linear)
- Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
- Power Inverters/Converters
- Electronic ballasts
- Industrial/Consumer electronics
- Mobile communications (phone, satellite, relay stations)
- Motor drives
- Transportation systems (electronic vehicles and trains, locomotives, avionics)

Requires a TDS TEKPROBE Oscilloscope or a TekConnect oscilliscope with TCA-BNC

Oscilloscope on-screen readout of magnitude and amps

Reduces measurement errors with no more hand calculations

Degauss, Probe open, Overload, Not terminated into 50 Ω, Noncompatible probe type

Development and analysis solutions for designers, installers, and service personnel in Telecomm, Data Comm, computer, and semiconductor power electronics environments for:

Power supplies (switching and linear)
Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
Power Inverters/Converters
Electronic ballasts
Industrial/Consumer electronics
Mobile communications (phone, satellite, relay stations)
Motor drives
Transportation systems (electronic vehicles and trains, locomotives, avionics)

Power supplies (switching and linear)

Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)

Power Inverters/Converters

Electronic ballasts

Industrial/Consumer electronics

Mobile communications (phone, satellite, relay stations)

Motor drives

Transportation systems (electronic vehicles and trains, locomotives, avionics)

Characteristic:

Bandwidth (-3 dB): DC – 2 MHz
Rise Time: ≤175 ns
Maximum Cur Ratings:
- High-cur Sensitivity Range: 1 A/mV Range:
  - DC (continuous): 500 A
  - RMS (sinusoidal): 500 A
  - Peak Pulse: 750 A
DC Accuracy (operating temp 0 °C to 50 °C): ±3% of reading
DC Accuracy, typical (operating temp 23 °C ±5 °C): ±1% of reading

Nominal:

Maximum Bare Wire Voltage:
- 600 VRMS CAT I & II
- 300 VRMS CAT III
Lowest Measurable Cur (at ±3% accuracy at DC):
- 1 A
- Scope set to 1 mV/div and 20 MHz BW limited
Insertion Impedance:
- 0.1 mΩ at 10 kHz
- 0.6 mΩ at 100 kHz
- 8 mΩ at 1 MHz
- 16 mΩ at 2 MHz
Maximum Amp-Second Product (based on amplifier range setting):
- NA – 1 A/mV
AC-coupling Low-frequency Bandwidth (Low Pass – 3 dB point):
Displayed RMS Noise (at 20 MHz bandwidth limit): ≤250 mARMS
Signal Delay (delay to output BNC): 80 ns
Probe Amplifier Inputs: 1
Probe Open Indicator: Yes
Overload Indicator: Yes
Termination Indicator: Yes
Noncompatible Probe Indicator: Yes

Bandwidth (-3 dB): DC – 2 MHz

Rise Time: ≤175 ns

Maximum Cur Ratings:

High-cur Sensitivity Range: 1 A/mV Range:
- DC (continuous): 500 A
- RMS (sinusoidal): 500 A
- Peak Pulse: 750 A

DC Accuracy (operating temp 0 °C to 50 °C): ±3% of reading

DC Accuracy, typical (operating temp 23 °C ±5 °C): ±1% of reading

High-cur Sensitivity Range: 1 A/mV Range:

DC (continuous): 500 A
RMS (sinusoidal): 500 A
Peak Pulse: 750 A

DC (continuous): 500 A

RMS (sinusoidal): 500 A

Peak Pulse: 750 A

Maximum Bare Wire Voltage:

600 VRMS CAT I & II
300 VRMS CAT III

Lowest Measurable Cur (at ±3% accuracy at DC):

1 A
Scope set to 1 mV/div and 20 MHz BW limited

Insertion Impedance:

0.1 mΩ at 10 kHz
0.6 mΩ at 100 kHz
8 mΩ at 1 MHz
16 mΩ at 2 MHz

Maximum Amp-Second Product (based on amplifier range setting):

NA – 1 A/mV

AC-coupling Low-frequency Bandwidth (Low Pass – 3 dB point):

Displayed RMS Noise (at 20 MHz bandwidth limit): ≤250 mARMS

Signal Delay (delay to output BNC): 80 ns

Probe Amplifier Inputs: 1

Probe Open Indicator: Yes

Overload Indicator: Yes

Termination Indicator: Yes

Noncompatible Probe Indicator: Yes

600 VRMS CAT I & II

300 VRMS CAT III

1 A

Scope set to 1 mV/div and 20 MHz BW limited

0.1 mΩ at 10 kHz

0.6 mΩ at 100 kHz

8 mΩ at 1 MHz

16 mΩ at 2 MHz

NA – 1 A/mV

Fabricante:
Modelo:	Tektronix TCP404XL
Descripción:	Sonda, corriente CA / CC, CC a 2 MHz 500 A CC
Hoja de datos PDF:	Tektronix TCP404XL
Quick Quote Tektronix TCP404XL PRESUPUESTO RÁPIDO Usado Acepto las condiciones de la página web Testwall Términos de Uso y Política de privacidad [honeypot town]
Add to Quote Cart Loading... Cart updated. Continue shopping or go to your quote cart

Sonda, corriente CA / CC, CC a 2 MHz 500 A CC

Tektronix TCP404XL Product Overview