Sorensen
Sorensen DHP 1
0-300 10.0V Power Supply
0 - 600 V CC Tensión de salida
0 - 1,7 A Corriente de salida
1000 W Potencia nominal
Fuente de alimentación programable de alta tensión Tipo de regulación
RS-232 / GPIB (opcional) Interfaz de programación
| Atributo | Valor |
|---|---|
| Tensión de salida | 0 - 600 V CC |
| Corriente de salida | 0 - 1,7 A |
| Potencia nominal | 1000 W |
| Tipo de regulación | Fuente de alimentación programable de alta tensión |
| Interfaz de programación | RS-232 / GPIB (opcional) |
| Resolución de tensión | 0,1 V |
| Resolución de corriente | 1 mA |
| Tensión de entrada (red) | 115 / 230 V CA, 50/60 Hz |
| Factor de forma | Montaje en rack 2U |
| Modos de operación | Voltaje constante (CV) / Corriente constante (CC) |
Sorensen DHP 1 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
