Sorensen
Sorensen DHP 15-200 15.0V Power Supply
5-200 15.0V Power Supply
15,0 V Voltaje de salida
200 A Corriente de salida máxima
3000 W Potencia máxima de salida
Tensión constante / Corriente constante (CV/CC) Tipo de regulación
208/240 V CA, monofásico Tensión de entrada
| Atributo | Valor |
|---|---|
| Voltaje de salida | 15,0 V |
| Corriente de salida máxima | 200 A |
| Potencia máxima de salida | 3000 W |
| Tipo de regulación | Tensión constante / Corriente constante (CV/CC) |
| Tensión de entrada | 208/240 V CA, monofásico |
| Regulación de línea | 0,01% + 2 mV |
| Regulación de carga | 0,01% + 2 mV |
| Rizado y ruido | 10 mV RMS máximo |
| Dimensiones (An x Al x Pr) | 483 mm x 132 mm x 584 mm (19" x 3U) |
| Temperatura de funcionamiento | 0 °C a 50 °C |
Sorensen DHP 15-200 15.0V Power Supply Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
