Sorensen
Sorensen DHP 30
0-83 300.0V Power Supply
30 V Tensión de salida máxima
33 A Corriente de salida máxima
1000 W Potencia máxima
Tensión constante / Corriente constante (CV/CC) Tipo de regulación
115/230 V CA, 50/60 Hz Tensión de entrada
| Atributo | Valor |
|---|---|
| Tensión de salida máxima | 30 V |
| Corriente de salida máxima | 33 A |
| Potencia máxima | 1000 W |
| Tipo de regulación | Tensión constante / Corriente constante (CV/CC) |
| Tensión de entrada | 115/230 V CA, 50/60 Hz |
| Rizado y ruido de tensión | Menos de 5 mV RMS |
| Rizado y ruido de corriente | Menos de 25 mA RMS |
| Estabilidad de línea y carga | 0,05% + 5 mV |
| Interfaz de control remoto | Programable mediante control remoto analógico |
| Dimensiones (An x Al x Pr) | 425 mm x 133 mm x 597 mm (3U) |
Sorensen DHP 30 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
