Sorensen
Sorensen DHP80-375
80-375 DC Power Supply
80 V Tensión de salida máxima
375 A Corriente de salida máxima
30.000 W (30 kW) Potencia máxima
Corriente continua (CC) Tipo de salida
208/240 V trifásico Tensión de entrada (CA)
| Atributo | Valor |
|---|---|
| Tensión de salida máxima | 80 V |
| Corriente de salida máxima | 375 A |
| Potencia máxima | 30.000 W (30 kW) |
| Tipo de salida | Corriente continua (CC) |
| Tensión de entrada (CA) | 208/240 V trifásico |
| Regulación de línea de tensión | 0,02% + 2 mV |
| Regulación de carga de corriente | 0,05% + 150 mA |
| Interfaz de programación | RS-232 / GPIB (IEEE-488) |
| Factor de potencia | Mayor o igual a 0,95 |
| Rango de temperatura de funcionamiento | 0 °C a 40 °C |
Sorensen DHP80-375 Options:
- DHP80-375 - Option - Three, 3-wire plus ground (3-phase input power)
- DHP80-375 - Option - 400 VAC input (tested to 360-440 VAC)
- DHP80-375 - Option - 480 VAC input (tested to 432-528 VAC)
| Model | DHP80-375 |
|---|
Output: 0-80Vdc 0-375 Amp
Ripple: 15mV (typical)
Regulation (Line or Load)
Voltage: 0.1% of maximum rated output
Current: 0.5% of maximum rated output
Transient Response: 2 ms to steady state output voltage (within 2% of Vmax) for 30% step load change (slower response in paralleled systems)
Stability: ?0.05% maximum rating per 8 hours after a 30 minute warm-up time at fixed line, load and temperature
Efficiency: 80% minimum at full load
Temperature Coefficient: 0.02%/?C of rated output voltage; 0.03%/?C of rated output current
Input:
190-253 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye input may be used (Wye does not require the neutral connection)
Operating Temperature: 0?C to +50?C, no derating
Storage Temperature: -20?C to 70?C
Cooling: Internal fan
