Sorensen
Sorensen SGA600-17
DC Power Supply, 600V, 17A, 10kW
600 V Tensión de salida
17 A Corriente de salida
10 200 W Potencia máxima
Fuente de alimentación de corriente continua (CC) programable Tipo de fuente de alimentación
0,01% + 2 mV Regulación de línea (tensión)
| Atributo | Valor |
|---|---|
| Tensión de salida | 600 V |
| Corriente de salida | 17 A |
| Potencia máxima | 10 200 W |
| Tipo de fuente de alimentación | Fuente de alimentación de corriente continua (CC) programable |
| Regulación de línea (tensión) | 0,01% + 2 mV |
| Regulación de carga (tensión) | 0,01% + 2 mV |
| Rizado y ruido (tensión) | 75 mV pico a pico / 25 mV RMS |
| Interfaces de control | Analógica, RS-232, GPIB (opcional) |
| Tensión de entrada (CA) | 208 V CA trifásico, 50/60 Hz |
| Dimensiones (An x Al x Pr) | 483 mm x 133 mm x 660 mm (3U, montaje en rack) |
Sorensen SGA600-17 Options:
- SGA600-17 - A - Control Option: Analog
- SGA600-17 - I - Control Option: Intelligent
- SGA600-17 - C - Input Voltage 187 / 242VAC, 3 Phase
- SGA600-17 - D - Input Voltage 342 / 440VAC, 3 Phase
- SGA600-17 - E - Input Voltage 396 / 528VAC, 3 Phase
- SGA600-17 - 0A - Remote Control: No Option
- SGA600-17 - 1A - Remote Control: IEEE-488.2 + RS-232C
- SGA600-17 - 1C - Remote Control: Ethernet + RS-232C
- SGA600-17 - 1D - Remote Control: Isolated Analog Control
- SGA600-17 - 1E - Remote Control: Shaft Locks (SGA series only)
- SGA600-17 - 2A - Remote Control: Combined Options 1A+1D
- SGA600-17 - 2C - Remote Control: Combined Options 1A+1E (SGA Only)
- SGA600-17 - 2G - Remote Control: Combined Options 1C+1D
- SGA600-17 - 2H - Remote Control: Combined Options 1C+1E (SGA Only)
- SGA600-17 - 2J - Remote Control: Combined Options 1D+1E (SGA Only)
- SGA600-17 - 3C - Remote Control: Combined Options 1A+1D+1E (SGA Only)
- SGA600-17 - 3G - Remote Control: Combined Options 1C+1D+1E (SGA Only)
- SGA600-17 - AA - Process Option: No option
- SGA600-17 - AB - Process Option: Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data)
- SGA600-17 - AJ - Modification: Front panel dust filter - factory installed - 3U unit only
- SGA600-17 - CV - Modification: 400Hz AC input @ 208 VAC (does not carry CE, CSA or UL marks) (6U only) STD on 3U
- SGA600-17 - PF - Modification: Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V)
- SGA600-17 - R - RoHS Compliant Version
| Model | SGA600-17 |
|---|
Sorensen SGA100-50The Sorensen SGA Series power supplies are general–purpose power supplies designed specifically for laboratory test and systems applications requiring variable DC sources with good ripple and regulation characteristics. These power supplies are constant cur/constant voltage supplies which offer a automatic crossover feature. A variety of user interfaces are available, ranging from manual front–panel control and standard non–isolated remote analog control, to optional GPIB, Ethernet or isolated remote analog contro C - Input Voltage 187 / 242VAC Standard MSRP: $8,346 | Available for al
High Power Density: 10kW in a 3U chassis Wide Voltage Range: 0-600V and 0-17 Amps Fast Load Transient Response: Protection from undesired voltage excursions Low RMS and P-P Noise: Suitable for the most sensitive applications Parallelable up to 150 kW: Expandable as your requirement grows Modular Design: Upgradeable for the ultimate in investment protection Display: 3½ digits Resolution: Optional IEEE-488.2 + RS-232C + Ethernet provides precise control Ethernet Control: Optional LXI Class C compliant communication through integrated web server Direct Relay Control: Control output and sense isolation relays, along with polarity relays. (Ethernet Option Only) Hardware Trigger: Ethernet Option Only Specifications of the Sorensen SGA600-17 include:
Common:Remote Sense: Load-line loss compensation for models <= 100 V is 10% above full scale voltage total (5% per load-line), and models > 100 V is 4% above full scale voltage total (2% per load-line). Parallel Operation: Up to 5 units may be paralleled for additional cur within the power supply single-unit specifications, with exception of the DC output cur set accuracy. Additional paralleled SG units will add 0.3% inaccuracy per unit. To parallel more than 5 units,contact factory. Series Operation: Up to 2 units (see Output Float Voltage) Input: Nominal Voltage 3 phase, 3 wire + ground: 208/220 VAC (operating range 187 - 242 VAC); 380/400 VAC (operating range 342 - 440 VAC); and 440/480 VAC (operating range 396 - 528 VAC) Frequency: 47 – 63Hz (optional 400Hz @ 208VAC, does not carry CE, UL or CSA markings) Power Factor: >0.9 typical at 208/220 VAC input; >0.78 typical at 380/400 VAC input; and >0.69 typical at 440/480 VAC input Protection (typical): ½ cycle ride-though on all three phases, 3 cycle ride through on single phase; missing phase shutdown (800V model 6.4 msec on all 3 phases) Environmental: Operating Temperature: 0 to 50º C Storage Temperature: -25º C to 65º C Humidity Range: Relative humidity up to 95% non-condensing, 0º C – 50º C Altitude: Operating full power available up to 5,000 ft. (~1,500 m), derate 10% of full power for every 1,000 feet higher; non-operating to 40,000 ft. (~12,000 m) Cooling: Front and side air inlet, rear exhaust. Temperature controlled, variable speed fans. Units may be stacked without spacing. Regulatory: Certified to UL/CSA 61010 and IEC/EN 61010-1, CE Compliant, Semi-F47 Compliant Front Panel Dust Filter: 30 PPI (Pores Per Inch) - must ensure adequate airflow and / or derate max. temperature. 3U unit only. Physical: Dimensions: Width: 19.00” (48.3 cm), Depth 25.0” (63.5 cm) Height: 5-15 kW units: 3U – 5.25” rack mount (13.34 cm) 20-30 kW units: 6U – 10.5” rack mount (26.67 cm) Weight: 3U < 80 lbs. (36 kg) 6U Output: Ripple & Noise (Voltage Mode, Typical): Ripple and noise specified at full load, nominal AC input. Noise measured with 6ft. cable, 1µf at load Ripple (Cur Mode): <+/- 0.04% of full scale rms cur DC Voltage Slew Rate: 45A / ms typical - resistive load Line Regulation (with sense wires used): (±10% of nominal AC input, constant load); Voltage Mode: +/- 0.01% of full scale; and Cur Mode: +/- 0.05% of full scale Load Regulation (with sense wires used): no load to full load, nominal AC input); Voltage Mode: +/- 0.02% of full scale; and Cur Mode: +/- 0.1% of full scale Load Transient Response: Recovers within 1ms to +/-0.75% of full-scale of steadystate output for a 50% to 100% or 100% to 50% load change Efficiency: 87% typical at nominal line and max load Stability: ±0.05% of set point after 30 minute warm-up and over 8 hours at fixed line, load and temperature Temperature Coefficient: 0.02%/ C of maximum output voltage rating for voltage set point 0.03%/ C of maximum output cur rating for cur set point Output Float Voltage: Negative terminal within +/- 300 V of chassis potential. (We recommend the use of optional isolated analog Interface (IAI).) Supplies in “series” should be the same output voltage/cur. Programming Specifications of the Sorensen SGA600-17 include:
Front Panel Display:Voltage Accuracy: +/- 0.1% of full scale Cur Accuracy: +/- 0.4% of full scale Resolution: 3½ digits Remote Analog Interface:
Voltage Accuracy: +/-0.25% of full scale for 0-5 V range, +/-0.5% of fullscale for 0-10 V range Cur Accuracy: 0.8% of full scale Remote Digital Interface: Voltage Accuracy: +/- 0.1% of full scale Cur Accuracy: +/- 0.4% of full scale Resolution: +/-0.002% of full scale OVP: Accuracy: +/- 1% of full scale Resolution: +/-0.002% of full scale User I/O: Disconnect & Polarity-reversal relay control (Only available with Ethernet Option) Read-Back / Monitoring Specifications of the Sorensen SGA600-17 include:
Front Panel Display:Voltage Accuracy: +/- 0.1% of full scale Cur Accuracy: +/- 0.4% of full scale Resolution: 3½ digits Remote Analog Interface:
Accuracy: +/-1.0% of full scale (0 - 10V) Remote Digital Interface: Voltage Accuracy: +/- 0.1% of full scale Cur Accuracy: +/- 0.4% of full scale Resolution: +/-0.002% of full scale User I/O: Disconnect & Polarity-reversal relay control (Only available with Ethernet Option)
Product Overview
Sorensen SGA600-17 (call for availability)
The Sorensen SGA600-17 is a Programmable Precision High Power DC Power Supply that provides front panel analog controls as well as essential features like 10-turn potentiometers for setting voltage and cur, 3½ digit LED readout plus front panel over-voltage protection (OVP) preview/adjustment and reset.Features of the Sorensen SGA600-17 include:Common:
Front Panel Display:
Front Panel Display:
