EN
DE
IT
FR
PL
Tektronix TCP0030A
| Fabricante | Tektronix |
| Modelo | TCP0030A |
| Producto | Current Probe, AC/DC, DC to 120 MHz 30 A DC |
| Type | Used |
SKU
143507
The Tekronix TCP0030 AC/DC Cur Probe is a high-performance and easy-to-use probe that enhances the bandwidth with selectable measurement ranges and also provides low-cur measurement capability and accuracy. The Tektronix TCP0030 Probe is designed specifically for those Oscilloscopes that have the TekVPI™ probe interface.Features and Specifications of the Tektronix TCP0030 AC/DC Cur Probe include: Features: Specifications: Easy-to-use and accurate AC/DC cur measurements Connects directly to Oscilloscopes with the TekVPI™ Probe Interface Provides automatic units scaling and readout on the Oscilloscope display Embeds the probe characteristics within the Oscilloscope Fully programmable over the Oscilloscope's interface Split-core construction allows easy circuit connection High accuracy with typically less than 1% DC gain error Accurately measures cur levels as low as 1 mA Low Noise and DC Drift Easy to degauss and autozero Setup controls and probe status/diagnostic indicators are provided on both the probe hardware, and through an easy-to-access Oscilloscope UI display menu Remote GPIB/USB probe control through the Oscilloscope Safety certified for U.S. and Canada Applications: Power supplies Semiconductor devices Power inverters/converters Electronic ballasts Industrial/consumer electronics Mobile communications Motor drives Transportation systems Bandwidth: DC to ≥120 MHz Rise time: ≤2.92 ns Max RMS cur: 30 A Max peak pulse cur: 50 A Jaw Diameter: 5mm Certified for bare wire voltages up to 150 V CAT II Minimum sensitivity: Cur ranges: 5 A and 30 A DC accuracy: Max amp-second product: 500 Aμs (in 30 A Range) Insertion impedance: Signal delay: 14.5 ns 1 mA (on Oscilloscopes that support 1 mV/div setting) AC Coupling (on Oscilloscopes that support AC/DC coupling) Typical: ±1% Warranted: ±3% 1 mΩ at 10 kHz 3.5 mΩ at 100 kHz 0.08 Ω at 1 MHz 0.15 Ω at 10 MHz 0.7 Ω at 100 MHz 0.85 Ω at 120 MHz
- Easy-to-use and accurate AC/DC cur measurements
- Connects directly to Oscilloscopes with the TekVPI™ Probe Interface
- Provides automatic units scaling and readout on the Oscilloscope display
- Embeds the probe characteristics within the Oscilloscope
- Fully programmable over the Oscilloscope's interface
- Split-core construction allows easy circuit connection
- High accuracy with typically less than 1% DC gain error
- Accurately measures cur levels as low as 1 mA
- Low Noise and DC Drift
- Easy to degauss and autozero
- Setup controls and probe status/diagnostic indicators are provided on both the probe hardware, and through an easy-to-access Oscilloscope UI display menu
- Remote GPIB/USB probe control through the Oscilloscope
- Safety certified for U.S. and Canada
- Applications:
- Power supplies
- Semiconductor devices
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications
- Motor drives
- Transportation systems
- Bandwidth: DC to ≥120 MHz
- Rise time: ≤2.92 ns
- Max RMS cur: 30 A
- Max peak pulse cur: 50 A
- Jaw Diameter: 5mm
- Certified for bare wire voltages up to 150 V CAT II
- Minimum sensitivity:
- 1 mA (on Oscilloscopes that support 1 mV/div setting)
- AC Coupling (on Oscilloscopes that support AC/DC coupling)
- Cur ranges: 5 A and 30 A
- DC accuracy:
- Typical: ±1%
- Warranted: ±3%
- Max amp-second product: 500 Aμs (in 30 A Range)
- Insertion impedance:
- 1 mΩ at 10 kHz
- 3.5 mΩ at 100 kHz
- 0.08 Ω at 1 MHz
- 0.15 Ω at 10 MHz
- 0.7 Ω at 100 MHz
- 0.85 Ω at 120 MHz
- Signal delay: 14.5 ns
- Power supplies
- Semiconductor devices
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications
- Motor drives
- Transportation systems
- 1 mA (on Oscilloscopes that support 1 mV/div setting)
- AC Coupling (on Oscilloscopes that support AC/DC coupling)
- Typical: ±1%
- Warranted: ±3%
- 1 mΩ at 10 kHz
- 3.5 mΩ at 100 kHz
- 0.08 Ω at 1 MHz
- 0.15 Ω at 10 MHz
- 0.7 Ω at 100 MHz
- 0.85 Ω at 120 MHz
Devoluciones
Si no estás completamente satisfecho con tu compra, simplemente devuelve el artículo en su estado original dentro de los 30 días posteriores a la recepción. Los artículos devueltos deben estar sin usar y en su embalaje original, junto con toda la documentación incluida. Emitiremos un reembolso completo al recibir el artículo, excluyendo el coste original del envío. Alternativamente, si lo prefieres, podemos cambiar el artículo.
IVA
Los precios no incluyen IVA. Transacciones intracomunitarias: Según la Directiva del IVA de la UE, las ventas B2B de bienes dentro de la UE están exentas de IVA. Cuando se aplica el IVA, se utiliza una tasa del 23%. Fuera de la UE no se aplica IVA.
