Advantest
Advantest R3754A
10kHz to 150MHz Network Analyser
300 kHz à 3 GHz Plage de fréquence
120 dB Dynamique de mesure
±0,8 dB Précision de niveau de sortie
50 Ω Impédance caractéristique
2 ports Nombre de ports
| Attribut | Valeur |
|---|---|
| Plage de fréquence | 300 kHz à 3 GHz |
| Dynamique de mesure | 120 dB |
| Précision de niveau de sortie | ±0,8 dB |
| Impédance caractéristique | 50 Ω |
| Nombre de ports | 2 ports |
| Type de mesure | Paramètres S (S11, S21, S12, S22) |
| Puissance de sortie maximale | +10 dBm |
| Interface de communication | GPIB (IEEE-488) |
| Alimentation électrique | 100 à 240 V CA, 50/60 Hz |
| Dimensions (L x H x P) | 426 mm x 177 mm x 498 mm |
| Model | R3754A |
|---|
The Advantest R3754A is a 10 kHz to 150 MHz Vector Network Analyzer.
Key Features
Frequency Accuracy: 0.0005%
Frequency Range: 10 kHz ? 150 MHz
Output Impedance: 50 ohms
Output Power Range: 0.0005 mW ? 125.89 mW
Sweep Range: 0.1dB
The Advantest R3754A is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two-port. Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest. The R3754A utilize synthesized-frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels. Advantest R3754A network analyzers also can perform ratioed measurements (including phase), which require multiple receivers. The R3754A can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.
