Sorensen
Sorensen DHP 1
0-300 10.0V Power Supply
0 – 600 V DC Tension de sortie
0 – 16,7 A Courant de sortie
10 000 W (10 kW) Puissance nominale
≤ 0,02 % + 2 mV Régulation de tension
≤ 0,02 % + 2 mA Régulation de courant
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 – 600 V DC |
| Courant de sortie | 0 – 16,7 A |
| Puissance nominale | 10 000 W (10 kW) |
| Régulation de tension | ≤ 0,02 % + 2 mV |
| Régulation de courant | ≤ 0,02 % + 2 mA |
| Ondulation et bruit (tension) | ≤ 50 mV crête à crête |
| Interface de programmation | RS-232 / RS-485 / GPIB en option |
| Tension d'alimentation secteur | 208 – 240 V AC, triphasé |
| Format mécanique | Rack 19 pouces, 3U |
| Plage de température de fonctionnement | 0 °C à +50 °C |
Sorensen DHP 1 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
