GW Instek
GW Instek GSP-830
3GHz - 3KHz 9KHz Spectrum Analyser
150 kHz to 3 GHz Frequency Range
1 kHz to 1 MHz (1-3-10 steps) Resolution Bandwidth (RBW)
1 kHz to 1 MHz (1-3-10 steps) Video Bandwidth (VBW)
0 to -80 dBm (10 dB/div, 8 divisions) Display Range
+20 dBm to -50 dBm (in 10 dB steps) Reference Level
| Attribute | Value |
|---|---|
| Frequency Range | 150 kHz to 3 GHz |
| Resolution Bandwidth (RBW) | 1 kHz to 1 MHz (1-3-10 steps) |
| Video Bandwidth (VBW) | 1 kHz to 1 MHz (1-3-10 steps) |
| Display Range | 0 to -80 dBm (10 dB/div, 8 divisions) |
| Reference Level | +20 dBm to -50 dBm (in 10 dB steps) |
| Input Impedance | 50 Ohms |
| Maximum Input Power | +20 dBm (continuous), 0 dBm (with pre-amplifier on) |
| Phase Noise | ≤ -80 dBc/Hz at 10 kHz offset |
| Display | 8-inch color TFT LCD, 800 x 600 resolution |
| Tracking Generator Output | -20 dBm to -50 dBm, 50 Ohms (optional) |
GW Instek GSP-830 Options:
- GSP-830 - Opt. 01 - Tracking Generator (9kHz ~ 3GHz Frequency Range, -50dBm ~ 0dBm Amplitude Range)
- GSP-830 - Opt. 02 - Battery Pack (10.8V Li-Ion battery pack x 2)
- GSP-830 - Opt. 03 - 1ppm Stability (1ppm, 0 ~ 50°C, 1ppm/yr)
- GSP-830 - Opt. 04 - 300Hz RBW (RBW 300Hz, 3dB bandwidth)
- GSP-830 - Opt. 05 - 9kHz & 120kHz RBW (RBW selections: 9kHz and 120kHz, 6dB bandwidth)
- GSP-830 - Opt. 06 - 10kHz & 100kHz RBW (RBW selections: 10kHz and 100kHz, 3dB bandwidth)
- GSP-830 - Opt. 07 - AM/FM Demodulator & 10kHz & 100kHz RBW (Demodulation: AM, FM; Output: internal speaker, 3.5mm stereo jack)
- GSP-830 - Opt. 08 - GPIB Interface (IEEE 488 bus, fully programmable with IEEE 488.2 compliance)
- GSP-830 - GSC-001 - Soft Carrying Case
- GSP-830 - GRA-404 - Rack Adapter Panel (Rack Mounting 19", 4U, for GSP-827/830)
- GSP-830 - GTL-401 - DC Power Cord with DC Jack and Lighter Plug, Current 5A (for GSP-827/830)
- GSP-830 - GTL-301 - RF Cable, RG 223 N(P/M), 1000mm
- GSP-830 - ATA-001 - BNC Antenna
- GSP-830 - GAP-801 - Preamplifier (Preamplifier with 10dB typical, 9kHz ~ 6GHz)
- GSP-830 - ATA-002 - Near Field Probe (Wideband, 0.1~1000 MHz, Low Noise, 2.9dB Typical)
- GSP-830 - GKT-001 - General Kit Set (includes GSC-002 Kit box, ADP-002 adaptor SMA(J/F)~N(P/M) x2, ATN-100 10dB attenuator N(J/F)~N(P/M) x1, GTL-303 RF cable assembly SMA(P/M) RD316 600mm x2)
- GSP-830 - GKT-002 - CATV Kit Set (includes GSC-003 Kit box, ADP-001 adaptor BNC(J/F)~N(P/M) x2, ADP-101 adaptor BNC(J/F)75~BNC(P/M)50 x2, GTL-304 RF cable assembly RG223 N(P/M)-N(J/F) 300mm x2)
- GSP-830 - GKT-003 - RLB Kit Set (includes GSC-004 Kit box, GAK-001 termination 50Ω N(P/M) x1, GAK-002 Cap with chain N(P/M) x1, GTL-302 RF cable assembly RG223 N(P/M) 300mm x2)
- GSP-830 - GKT-006 - EMI Probe Kit Set (includes ANT-02 3cm Loop H-Field Probe, ANT-01 6cm Loop H-Field Probe, ANT-03 6mm Stub tip E-Field Probe, PR-03 Touch Passive Probe, ADP-02 N(P/M)~SMA(J/F) Adapter, ADP-01 N(P/M)~BNC(J/F) Adapter, BNC(P/M)~BNC(P/M) RF Cable, SMA(P/M)~SMA(P/M) RF Cable)
| Model | GSP-830 |
|---|
The GW Instek GSP-830 is a 3.00 GHz - 3 KHz , 9.00 KHz Spectrum Analyser
